Mitigating Downhole Vibrations in Bottom Hole Assemblies Using Finite Element Analysis
- 18 April 2017
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Mitigating downhole vibrations is paramount to safe and cost-effective drilling. Excessive vibrations in bottom hole assemblies (BHA) generated from rock-bit interactions can be quantified and hence minimized using finite element dynamic analysis as a tool. Hence, improving rate of penetrations (ROP), minimize BHA failures, high cost savings and ultimately eliminate drilling accidents. Extensive research has been done in order to better understand the three main modes that drive these vibrations to undesired magnitudes. These modes are: axial, lateral and torsional vibrations. Axial vibrations are better known as ‘bit-bouncing’, lateral as ‘bit whirling’ and torsional vibration are known as ‘stick-slip’ which is the most common of these three. Previous research has focused on these modes individually and coupling of two of these, but no study using Finite Element Analysis (FEA) has been done considering these three in the same model. The modern finite element analysis tool utilized in this study provides an opportunity to couple axial, lateral and torsional vibrations for planning and optimization of bottom hole assemblies. This is possible due to the newest developments in computing power and better discretization algorithms. A superimposition of all three vibration modes allows the user to physically see where and when the composite resonance will be generated. In this paper, three vibration modes will be coupled using (FEA) in an attempt to mitigate vibrations affecting the drillstring and BHA by optimizing the amount and positioning of stabilizers. This analysis is focused on the lower portion of the entire drillstring where the vibrations are generated. This holistic approach is beneficial in design safer well plans and bottom hole assembliesKeywords
This publication has 22 references indexed in Scilit:
- Unveiling complexity of drill–string vibrations: Experiments and modellingInternational Journal of Mechanical Sciences, 2015
- A comparative review of modelling and controlling torsional vibrations and experimentation using laboratory setupsJournal of Petroleum Science and Engineering, 2013
- Experimental and computational failure analysis of drillstringsEngineering Failure Analysis, 2009
- Avoiding harmful oscillations in a drillstring through dynamical analysisJournal of Sound and Vibration, 2007
- Nonlinear Stochastic Drill-String VibrationsJournal of Vibration and Acoustics, 2002
- Stick-slip Whirl Interaction in Drillstring DynamicsJournal of Vibration and Acoustics, 2002
- An Integrated Model for Drill-String DynamicsJournal of Sound and Vibration, 1999
- Flexural vibrations of rotors immersed in dense fluids part I: TheoryJournal of Fluids and Structures, 1992
- Bottom-Hole Assembly Analysis Using the Finite-Element MethodJournal of Petroleum Technology, 1978
- Longitudinal and Angular Drill-String Vibrations With DampingJournal of Engineering for Industry, 1968