Dispersion, temperature and torque models for an internal mixer
Authors:
- 26 July 2004
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 44 (7) , 1247-1257
Abstract
Models based on kinetic, thermodynamic and rheological equations have been developed to compute dispersion extent, batch temperature and relative batch viscosity at discrete intervals during a mix cycle in an internal mixer. The calculated relative bulk viscosity can be linked empirically to a measured variable such as rotor torque or power consumption. Solution of the models over successive time intervals allows the computation of complete dispersion, temperature, and torque/power profiles for a mix cycle. The mix models exhibit good fits to experimental torque and temperature curves for mixing natural rubber with carbon black over a wide range of carbon black loadings (0 to 50 phr) for rotor speeds ranging from 40 to 70 RPM in two lab‐scale internal mixers. The models are shown to be suitable for moderately reinforcing (ASTM N660) as well as highly reinforcing (ASTM N121) grades of carbon black. Rate constants for filler dispersion, incorporation and erosion can be extracted from the models and can be interpolated to generate dispersion, temperature and torque curves at new conditions of carbon black loading and rotor speed. The mix models could thus be used for process‐control purposes and for specifying drop targets based on batch properties in addition to the time‐temperature‐energy criteria typically used today. Polym. Eng. Sci. 44:1247–1257, 2004. © 2004 Society of Plastics Engineers.Keywords
This publication has 13 references indexed in Scilit:
- A physical‐mathematical model for the dispersion process in continuous mixersPolymer Engineering & Science, 2002
- ExhibitorsWorld Pumps, 2000
- Conference sessionsWorld Pumps, 1998
- Analysis of Power Requirements and Dispersion Quality in Batch Compounding Using a Dispersion Model for Single AgglomeratesRubber Chemistry and Technology, 1996
- The Dispersion of Carbon Black in Rubber Part IV. The Kinetics of Carbon Black Dispersion in Various PolymersRubber Chemistry and Technology, 1994
- Mixing of Carbon Black with Rubber. II. Mechanism of Carbon Black IncorporationRubber Chemistry and Technology, 1985
- Mixing of Carbon Black with Rubber I. Measurement of Dispersion Rate by Changes in Mixing TorqueRubber Chemistry and Technology, 1984
- Dispersive Mixing in Internal Mixers—A Theoretical Model Based on Agglomerate RuptureRubber Chemistry and Technology, 1982
- The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming LiquidsJournal of the American Chemical Society, 1955
- The viscosity of suspensions of rigid spheresBritish Journal of Applied Physics, 1952