Suppression of common-mode input electromagnetic interference noise in DC–DC converters using the active filtering method
Authors:
- 2 August 2011
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 4 (7) , 776-784
Abstract
This study introduces a technique that combines passive and active electromagnetic interference (EMI) filtering methods to attenuate the common mode conducted noise in the input bus of the DC/DC converter and to minimise the size and the cost of the existing passive EMI filters. The technique presented can be implemented in all DC/DC converters topologies to provide a level of compliance with the electromagnetic directives. The circuit analysis and the attenuation curves showing the performance and the viability of this technique is provided. The filter input/output impedance criterion is verified to ensure the stability of the converter, by measuring the gain and the phase margins of the open-loop frequency response of the converter. The proposed technique provides a valuable design solution for compliance engineers where the Printed Circuit Board real-estate is an issue. Experimental results reveal more than 30 dB attenuation across the electromagnetic compatibility spectrum. This method contributes to the reduction of the size and weight of the input passive EMI filter. The proportion of the passive filter as compared to the DC/DC converter device can vary from 5 to 3%, depending on the converter specifications. Experimental results to demonstrate the performance and the effectiveness of the input active EMI filter in DC/DC converters are presented.Keywords
This publication has 15 references indexed in Scilit:
- A Study of Integration of Parasitic Cancellation Techniques for EMI Filter Design With Discrete ComponentsIEEE Transactions on Power Electronics, 2008
- Analysis of Input Filter Interactions in Switching Power ConvertersIEEE Transactions on Power Electronics, 2007
- Identification of Essential Coupling Path Models for Conducted EMI Prediction in Switching Power ConvertersIEEE Transactions on Power Electronics, 2006
- Power Converter EMI Analysis Including IGBT Nonlinear Switching Transient ModelIEEE Transactions on Industrial Electronics, 2006
- Accurate Loop Gain Prediction for DC–DC Converter Due to the Impact of Source/Input FilterIEEE Transactions on Power Electronics, 2005
- New simplified method for the simulation of conducted emi generated by switched power convertersIEEE Transactions on Industrial Electronics, 2003
- Reduction in conducted EMI noises of a switching power supply after thermal management designIEE Proceedings - Electric Power Applications, 2003
- Power electronic converter EMC analysis through state variable approach techniquesIEEE Transactions on Electromagnetic Compatibility, 2001
- Separation of the common-mode- and differential-mode-conducted EMI noiseIEEE Transactions on Power Electronics, 1996
- Input filter design for multiple-module DC power systemsIEEE Transactions on Power Electronics, 1996