Performance and Emissions of an LPG Lean-Burn Engine for Heavy Duty Vehicles
Authors:
- 3 May 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Performance and emissions of an LPG lean burn engine for heavy duty vehicles were measured. The piston cavity, swirl ratio, propane - butane fuel ratio, and EGR were varied to investigate their effects on combustion, and thus engine performance. Three piston cavities were tested: a circular flat-bottomed cavity with sloped walls (called the “bathtub” cavity), a round bottomed cavity (called the “dog dish” cavity), and a special high-turbulence cavity (called the “nebula” cavity). Compared to the bathtub and dog dish cavities, the nebula type cavity showed the best performance in terms of cyclic variation and combustion duration. It was capable of maintaining leaner combustion, thus resulting in the lowest NOx emissions. High swirl improved combustion by achieving a high thermal efficiency and low NOx emissions. In general, as the propane composition increased, cyclic variation fell, NOx emissions increased, and thermal efficiency was improved. The thermal efficiency and cyclic variation were improved by EGR at λ = 1.4, compared to lean burn (λ = 1.5) without EGR.Keywords
This publication has 12 references indexed in Scilit:
- Observation of Flame Propagation in an LPG Lean Burn SI EngineSAE International Journal of Advances and Current Practices in Mobility, 1999
- Flame Speeds in a Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 1994
- Visualization of Flow/Flame Interaction in a Constant-Volume Combustion ChamberSAE International Journal of Advances and Current Practices in Mobility, 1993
- Tumbling Motion: A Mechanism for Turbulence Enhancement in Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1990
- A Fractal Model of Turbulent Flame Kernel GrowthSAE International Journal of Advances and Current Practices in Mobility, 1990
- High Speed Schlieren Visualization of Flame Initiation in a Lean Operating S.I. EngineSAE International Journal of Advances and Current Practices in Mobility, 1987
- Squish and Swirl-Squish Interaction in Motored Model EnginesJournal of Fluids Engineering, 1983
- Combustion Chamber Effects on Burn Rates in a High Swirl Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 1983
- Cycle Resolved Turbulence Measurements in a Ported Engine With and Without SwirlSAE International Journal of Advances and Current Practices in Mobility, 1983
- Stroboscopic Laser Shadowgraph Study of the Effect of Swirl on Homogeneous Combustion in a Spark-Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 1981