Innovative high-strength screw connections for additive manufactured thermoplastic components
Open Access
- 12 November 2024
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 135 (9-10) , 4669-4682
Abstract
Components that are additively manufactured by material extrusion (MEX) are exposed to complex challenges due to their layered structure. Anisotropy and the risk of delamination must be given special consideration, especially when they are exposed to high loads. In case high-loaded components have additionally to be connected to other parts or assemblies via screw connections, the connection area in the MEX-manufactured component is a limiting factor for usability. This article presents a novel method in which a preheated metallic threaded sleeve with internal and external threads is inserted into the component in order to create a high-strength threaded anchoring. This prevents pre-damage such as delamination in advance. As part of preliminary investigations, a selection of relevant parameters was first made. An open parameter test rig was developed with which the threaded sleeves could be applied into test specimens with high repeat accuracy. The effectiveness and the increase in the achievable pull-out forces were demonstrated by means of pull-out tests. It was also shown that the heat input via the outer thread flanks during application has a positive influence on the overall strength of the component.Keywords
Funding Information
- Technische Universität Berlin
This publication has 19 references indexed in Scilit:
- Performance evaluation of polymer-filled metal fused filament fabrication tooling for profile extrusionThe International Journal of Advanced Manufacturing Technology, 2024
- Design Guidelines2023
- Method for potential assessment and adaptation for additive manufacturing of conventionally manufactured componentsResearch in Engineering Design, 2023
- Auxetic behavior of 3D-printed structure made in acrylonitrile butadiene styrene and carbon fiber-reinforced polyamideProgress in Additive Manufacturing, 2023
- Nonlinear Material Modeling for Mechanical Characterization of 3-D Printed PLA Polymer With Different Infill DensitiesApplied Composite Materials, 2023
- Mechanical characterization of FDM parts through instrumented flat indentationThe International Journal of Advanced Manufacturing Technology, 2023
- Mechanical and Physical Characterization of Parts Manufactured by 3D Printing2022
- Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimensEngineering Fracture Mechanics, 2022
- The AM Dowel – A Novel Insert for the Integration of Threads into Additive Manufactured Polymer Components2020
- Tests of Threaded Connections Made by Additive Manufacturing Technologies2019