Fluorocarbon Thin Films Fabricated using Carbon Nanotube/Polytetrafluoroethylene Composite Polymer Targets via Mid-Frequency Sputtering
Open Access
- 3 May 2017
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 1451
Abstract
Carbon nanotube/polytetrafluoroethylene composite polymer targets are proposed for use in the fabrication of fluorocarbon thin films using the mid-frequency sputtering process. Fluorocarbon thin films deposited using carbon nanotube/polytetrafluoroethylene composite targets exhibit an amorphous phase with a smooth surface and show a high water contact angle, optical transmittance, and surface hardness. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy studies reveal that as the carbon nanotube concentration increased in the composite target, a carbon cross-linked structure was formed, which enhanced the film hardness and the modulus of the fluorocarbon thin film. Large-area fluorocarbon thin films with a substrate width of 700 mm were successfully fabricated by a pilot-scale roll-to-roll sputtering system using a carbon nanotube/polytetrafluoroethylene composite target.Keywords
This publication has 71 references indexed in Scilit:
- High Superhydrophobicity Achieved on Poly(ethylene terephthalate) by Innovative Laser-Assisted Magnetron SputteringThe Journal of Physical Chemistry C, 2011
- Poly(tetrafluoroethylene) Sputtered Polypropylene Membranes for Carbon Dioxide Separation in Membrane Gas AbsorptionIndustrial & Engineering Chemistry Research, 2011
- The relationship between automation complexity and operator errorJournal of Hazardous Materials, 2008
- Superhydrophobic properties of ultrathin rf-sputtered Teflon films coated etched aluminum surfacesMaterials Letters, 2008
- Adhesion and Tribological Properties of Sputtered Polymer Thin Films with Thermally Stable Polymer TargetsSHINKU, 2007
- Plasma polymers prepared by RF sputtering of polyethyleneVacuum, 2003
- ITO coating by reactive magnetron sputtering–comparison of properties from DC and MF processingThin Solid Films, 1999
- Transparent and conductive aluminum doped zinc oxide films prepared by mid-frequency reactive magnetron sputteringThin Solid Films, 1999
- Similarity of Plasma-Polymerized Tetrafluoroethylene and Fluoropolymer Films Deposited by rf Sputtering of Poly(tetrafluoroethylene)Langmuir, 1998
- The properties of films prepared by the rf sputtering of PTFE and plasma polymerization of some freonsVacuum, 1981