Impact of drying-wetting cycles on the soil aggregate stability of Alfisols in southwestern China
Authors:
- B. HuBHB. Hu
- Y. WangYWY. Wang
- B. WangB. Wang
- C. LiuCLC. Liu
- C. WangC. Wang
- 1 July 2018
- journal article
- research article
- Published by Taylor & Francis in Journal of Soil and Water Conservation
- Vol. 73 (4) , 469-478
Abstract
Drying-wetting cycles are important environmental factors controlling potential changes in aggregate stability. However, the relationships between soil aggregate stability and drying-wetting cycles under different breakdown mechanisms are not clear. We conducted a simulation study to investigate the effects of drying-wetting cycles on aggregate stability under the three main breakdown mechanisms (slaking, microcracking, and mechanical breakdown) without soil organic matter inputs. Four initial aggregate size classes (i.e., 1 to 2, 2 to 3, 3 to 5, and 5 to 7 mm) within a clay-loam soil, which undergoes intense drying-wetting cycles, were selected and subjected to eight levels of drying-wetting cycles (i.e., 0, 1, 2, 3, 5, 7, 10, and 15 cycles). Aggregate stability was measured with three treatment methods involving fast wetting (FW), slow wetting (SW), and shaking after prewetting treatments (ST). Our study showed higher resistance to mechanical breakdown and lower resistance to slaking. Compared with the mean weight diameter (MWD), the normalized mean weight diameter (NMWD) was a better indicator of comparing the susceptibility of different initial size aggregates to breaking up into smaller aggregates. The values of NMWD for 1 to 2, 2 to 3, 3 to 5, and 5 to 7 mm aggregates were 0.1, 0.1, 0.09, and 0.09, respectively, for FW; 0.35, 0.34, 0.33, and 0.32, respectively, for SW; and 0.46, 0.45, 0.44, and 0.42, respectively, for ST. This indicated that as initial aggregate size increased, aggregates were more prone to breaking down. The effects of drying-wetting cycles on aggregate stability varied greatly among different aggregate breakdown mechanisms. For 1 to 2, 2 to 3, 3 to 5, and 5 to 7 mm size aggregates, drying-wetting cycles decreased MWD by 61%, 67%, 70%, and 53%, respectively, for SW, and 69%, 72%, 80%, and 78%, respectively, for ST. For FW, MWD increased by 5%, 7%, 8%, and 36% after the first two cycles, respectively, while it decreased by 36%, 36%, 44%, and 15% after 15 cycles. The results showed that different aggregate breakdown mechanisms influence the effects of drying-wetting cycles on aggregate stability. This study provides an important basis for better soil management practices and yields insights for an improved understanding of the role of drying-wetting cycles on aggregate stability.Keywords
This publication has 44 references indexed in Scilit:
- Effect of vegetation type on microstructure of soil aggregates on the Loess Plateau, ChinaAgriculture, Ecosystems & Environment, 2017
- Aggregate Stability and Water Retention Near Saturation Characteristics as Affected by Soil Texture, Aggregate Size and Polyacrylamide ApplicationLand Degradation & Development, 2016
- Biochars improve aggregate stability, water retention, and pore‐space properties of clayey soilJournal of Plant Nutrition and Soil Science, 2013
- Comparing Aggregate Stability Tests for Soil Physical Quality IndicatorsLand Degradation & Development, 2013
- IMPACT OF LAND USE CHANGE ON EROSION RISK: AN INTEGRATED REMOTE SENSING, GEOGRAPHIC INFORMATION SYSTEM AND MODELING METHODOLOGYLand Degradation & Development, 2011
- Size fractions resulting from an aggregate stability test, interrill detachment and transportEarth Surface Processes and Landforms, 2004
- Weather, cropping practices and sampling depth effects on tensile strength and aggregate stabilitySoil and Tillage Research, 1994
- Organic matter incorporation affects mechanical properties of soil aggregatesSoil and Tillage Research, 1994
- Analyse des mecanismes de desagregation e de la mobilisation des particules de terre sous l'action des pluiesSoil Technology, 1989
- Advances in characterization of soil structureSoil and Tillage Research, 1988