Unveiling the Stabilities of Nickel‐Based Layered Oxide Cathodes at an Identical Degree of Delithiation in Lithium‐Based Batteries
- 5 July 2021
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 33 (32) , 2100804
Abstract
Bulk, surface, and interfacial instabilities that impact the cycle and thermal performances are the major challenges with high‐energy‐density LiNi1−x–yMnxCoyO2 (NMC) cathodes with high nickel contents. It is generally believed that the instabilities and performance losses become exponentially aggravated as the nickel content increases. Disparate from this prevailing belief, it is herein demonstrated that NMC cathodes with higher Ni contents may imply better overall stability than “lower‐Ni” cathodes under an identical degree of delithiation (charging) conditions. With two representative cathodes, LiNi0.8Mn0.1Co0.1O2 and LiNiO2, a systematic investigation into their stabilities with control of the degree of delithiation is presented. Electrochemical tests indicate that LiNiO2 displays better cyclability than LiNi0.8Mn0.1Co0.1O2 at the same delithiation state. Comprehensive structural and interphase investigations unveil that the inferior cyclability of LiNi0.8Mn0.1Co0.1O2 predominantly results from aggravated parasitic reactions, and the interphase stability may be more critical than lattice stability in dictating cyclability. Also, LiNiO2 delivers similar or better thermal behavior than LiNi0.8Mn0.1Co0.1O2. The findings demonstrate a strong correlation of the stability of NMC cathodes to the degree of delithiation state rather than the Ni content itself, highlighting the importance of reassessing the true implications of Ni content and structural and interphasial tuning on the stabilities of NMC cathodes.Keywords
Funding Information
- U.S. Department of Energy
This publication has 58 references indexed in Scilit:
- Lattice volume change during charge/discharge reaction and cycle performance of Li[NixCoyMnz]O2Solid State Ionics, 2016
- A Lithium‐Ion Battery based on an Ionic Liquid Electrolyte, Tin–Carbon Nanostructured Anode, and Li2O–ZrO2‐Coated Li[Ni0.8Co0.15Al0.05]O2 CathodeEnergy Technology, 2015
- Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteriesNature Communications, 2014
- Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteriesJournal of Power Sources, 2013
- Correlation between dissolution behavior and electrochemical cycling performance for LiNi1/3Co1/3Mn1/3O2-based cellsJournal of Power Sources, 2012
- Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical studyEnergy & Environmental Science, 2011
- Studies on Storage Characteristics of LiNi[sub 0.4]Co[sub 0.2]Mn[sub 0.4]O[sub 2] as Cathode Materials in Lithium-Ion BatteriesJournal of the Electrochemical Society, 2007
- Contribution of the Structural Changes of LiNi[sub 0.8]Co[sub 0.15]Al[sub 0.05]O[sub 2] Cathodes on the Exothermic Reactions in Li-Ion CellsJournal of the Electrochemical Society, 2006
- A comparative study of LiNi0.8Co0.2O2 cathode materials modified by lattice-doping and surface-coatingSolid State Ionics, 2004
- Thermal behavior and the decomposition mechanism of electrochemically delithiated Li1−xNiO2Journal of Power Sources, 2001