Calcium phosphate submicrometric fibers produced by solution blow spinning
Open Access
- 1 January 2019
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (3)
Abstract
The purpose of this work was to produce submicrometric hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) biphasic fibers by means of solution blow spinning (SBS). This method was chosen due to its lower cost and higher production rate than those of electrospinning, which is normally employed in ceramic fiber production. The fibers thus obtained were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The in vitro bioactivity and cytotoxicity of the fibers were also investigated. The XRD patterns indicated the formation of biphasic HA/βTCP fibers. SEM analysis revealed an interconnected cylindrical morphology with the presence of beads. Fiber diameters in the submicrometric range varied from 374 to 451 nm. TGA results indicated that organic losses occurred solely below 600ºC. All the fibers were non-cytotoxic, presenting an inhibitory concentration (IC) of > IC50. All the samples successfully formed acicular apatite layers when immersed in SBF, indicating a high potential for in vivo bone bioactivity.Keywords
This publication has 32 references indexed in Scilit:
- The influence of salt and solvent concentrations on electrospun polyvinylpyrrolidone fiber diameters and bead formationPolymer, 2013
- Room Temperature Radiolytic Synthesized Cu@CuAlO2-Al2O3 NanoparticlesInternational Journal of Molecular Sciences, 2012
- A comparative study of hydroxyapatite nanoparticles synthesized by different routesQuímica Nova, 2012
- Electrospun hydroxyapatite fibers from a simple sol–gel systemMaterials Letters, 2012
- Microwave-hydrothermal synthesis and characterization of hydroxyapatite nanocrystallitesMaterials Letters, 2011
- Calcium Orthophosphates in Nature, Biology and MedicineMaterials, 2009
- Synthesis of nanosize single-crystal hydroxyapatite via mechanochemical methodMaterials Letters, 2009
- Electrospinning of PVA‐Calcium Phosphate Sol Precursors for the Production of Fibrous HydroxyapatiteJournal of the American Ceramic Society, 2007
- An investigation of the interaction between polyvinylpyrrolidone and metal cationsReactive and Functional Polymers, 2000
- A kinetic and mechanistic study of the thermal decomposition of calcium nitrateThermochimica Acta, 1996