Correlations in Performance of Fiber-Reinforced Concrete Assessed Using EN 14651 and Modified ASTM C1609/C1609M-19 Beam Tests
Author:
- 25 February 2022
- journal article
- research article
- Published by ASTM International in Advances in Civil Engineering Materials
- Vol. 11 (1) , 64-80
Abstract
The mechanical performance of fiber-reinforced concrete (FRC) is commonly assessed using simply-supported beam-based test methods such as ASTM C1609/C1609M-19, Standard Test Method for Flexural Toughness of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading), and EN 14651, Test Method for Metallic Fibre Concrete - Measuring the Flexural Tensile Strength (Limit of Proportionality (LOP), Residual). These methods can be used to characterize flexural performance at first peak and in the post-crack range for specimens of FRC prepared either in the laboratory or in the field. The EN 14651 test method involves application of a central point load to a notched beam, with performance quantified as flexural strength expressed as a function of crack mouth opening displacement. The ASTM C1609/C1609M-19 test method involves application of third-point loading to a beam lacking a notch, with performance quantified as load resistance expressed as a function of central deflection. The distribution of stress differs between the two test methods, and it is difficult to directly compare post-crack performance. However, a method of calculating the crack width for a third-point loaded beam based on the measured central deflection and crack offset from the center of loading has recently been published. This method permits the post-crack performance of an ASTM C1609/C1609M-19 beam to be expressed in terms of the estimated maximum crack width without directly measuring the crack width. The current investigation examines whether post-crack flexural strengths obtained with ASTM C1609/C1609M-19 using this modified method produces equivalent performance to that obtained using EN 14651 for a given FRC mixture.Keywords
This publication has 15 references indexed in Scilit:
- Material characterisation of macro synthetic fibre reinforced concreteCement and Concrete Composites, 2017
- Estimation of Population Standard Deviation for Post-Crack Performance of Fiber-Reinforced ConcreteAdvances in Civil Engineering Materials, 2017
- Post-crack performance of fibre reinforced concrete and its effect on the first peak cracking load of slabsAustralian Journal of Structural Engineering, 2016
- Influence of Friction in Supporting Rollers on the Apparent Flexural Performance of Third-Point Loaded Fiber Reinforced Concrete BeamsAdvances in Civil Engineering Materials, 2014
- Derivation of the σ‐w relationship for SFRC from prism bending testsStructural Concrete, 2014
- Development of a 1200-mm-Diameter Round Panel Test for Post-Crack Assessment of Fiber-Reinforced ConcreteAdvances in Civil Engineering Materials, 2013
- Analysis of Support Apparatus for Flexural Load-Deflection Testing: Minimizing Bias Caused by Arching ForcesJournal of Testing and Evaluation, 2013
- Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 2—Approximation of δ from the CMOD responseMaterials and Structures, 2003
- Correlations in the behaviour of fibre reinforced shotcrete beam and panel specimensMaterials and Structures, 2002
- Effects on Flexural Performance of Sawing Plain Concrete and of Sawing and Other Methods of Altering the Degree of Fiber Alignment in Fiber-Reinforced ConcreteCement, Concrete and Aggregates, 1989