Experimental Set-Up of the Production Process and Mechanical Characterization of Metal Foams Manufactured by Lost-PLA Technique with Different Cell Morphology
Open Access
Abstract
A flexible and versatile method for manufacturing open-cell metal foams, called lost-PLA, is presented in this work. With a double extruder 3D printer (FDM, Ultimaker S3, Utrecht, The Netherlands), it is possible to make polymer-based samples of the lost model. Through CAD modeling, different geometries were replicated so as to get black PLA samples. This method combines the advantages of rapid prototyping with the possibility of manufacturing Al-alloy specimens with low time to market. The production process is articulated in many steps: PLA foams are inserted into an ultra-resistant plaster mix, after which the polymer is thermally degraded. The next step consists of the gravity casting of the EN-6082 alloy in the plaster form, obtaining metal foams that are interesting from a technological point of view as well as with respect to their mechanical properties. These foam prototypes can find application in the automotive, civil and aeronautical fields due to their high surface/weight ratio, making them optimal for heat exchange and for the ability to absorb energy during compression. The main aspects on which we focus are the set-up of the process parameters and the characterization of the mechanical properties of the manufactured samples. The main production steps are examined at first. After that, the results obtained for mechanical performance during static compression tests with different geometry porosities are compared and discussed. The foam with truncated octahedron cells was found to show the highest absorbed energy/relative density ratio.Keywords
This publication has 23 references indexed in Scilit:
- Lightweight Metal Cellular Structures Fabricated via 3D Printing of Sand Cast MoldsAdvanced Engineering Materials, 2015
- Manufacturing and Characterization of AlSi Foams as Core MaterialsProcedia Engineering, 2015
- Deformation and failure behaviour of open cell Al foams under quasistatic and impact loadingMaterials Science and Engineering: A, 2013
- Measuring and Simulating Acoustic Absorption of Open‐Celled MetalsAdvanced Engineering Materials, 2013
- Effect of pore size and relative density on the mechanical properties of open cell aluminum foamsScripta Materialia, 2007
- Partition energy absorption of axially crushed aluminum foam-filled hat sectionsInternational Journal of Solids and Structures, 2005
- Mechanisms and mechanics of compressive deformation in open-cell Al foamsMechanics of Materials, 2004
- Electrical Conductivity of Open-cell Metal FoamsJournal of Materials Research, 2002
- Manufacture, characterisation and application of cellular metals and metal foamsProgress in Materials Science, 2001
- The mechanical properties of cellular solidsMetallurgical Transactions A, 1983