Laser-Induced Carbon-Based Smart Flexible Sensor Array for Multiflavors Detection
Authors:
- Yongchao YuYYYongchao Yu
- Jayne WuJWJayne Wu
- Anming HuAnming Hu
- 14 September 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (40) , 34005-34012
Abstract
We report a flexible sensor array electronic tongue system that is fabricated on a polymer substrate by the laser direct writing process for multiflavor detection. Electronic tongue is a sensing system that is applied to detect different elements with the same sensor array. By analyzing responses from different measurement units, it enables a cross-sensitivity, namely, the ability of the system to responding to a range of different analytes in solution without specific functionalization of sensors. In this article, a six-unit sensing array system was fabricated by a laser direct writing process. Sensing units were introduced on a flexible polyamide surface. A high surface–volume ratio porous carbon structure was created by a laser-induced carbonization process, which provides stable conductive carbon electrodes with high sensitivity. Different surface treatments, such as gold plating, reduced-graphene oxide coating, and polyaniline coating, were accomplished for different measurement units. By applying principal component analysis, this sensing system shows a promising result for the detection of multiple flavors. The detection limit for each element is about 0.1 mM for NaCl and sugar solutions. Also, it is able to detect 10–4 times diluted commercial table vinegar solution, which originally contains 5% acetic acid. The detection limit is theoretically lower than the human threshold of 10 mM for NaCl and sugar. Besides, the sensing system shows a high sensitivity and selectivity for mixed elements. By mapping the data points, the sensor system could detect flavor combinations and provide a reliable prediction of analyte concentration ratios.Keywords
Funding Information
- Oak Ridge National Laboratory
This publication has 53 references indexed in Scilit:
- Bisphenol A Sensors on Polyimide Fabricated by Laser Direct Writing for Onsite River Water Monitoring at Attomolar ConcentrationACS Applied Materials & Interfaces, 2016
- Vertically Aligned Carbon Nanofibers as a Cell Impedance SensorIEEE Transactions on Nanotechnology, 2016
- Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysisNature, 2016
- Opto-electronic humidity sensor: A reviewSensors and Actuators A: Physical, 2015
- Wearable Sensors for Human Activity Monitoring: A ReviewIEEE Sensors Journal, 2014
- Vertically Aligned Carbon Nanofiber based Biosensor Platform for Glucose SensorInternational Journal of High Speed Electronics and Systems, 2014
- Wearable electrochemical sensors for in situ analysis in marine environmentsThe Analyst, 2011
- Sensor arrays for liquid sensing – electronic tongue systemsThe Analyst, 2007
- High-Sensitivity Humidity Sensor Based on a Single SnO2 NanowireJournal of the American Chemical Society, 2007
- Micropower CMOS temperature sensor with digital outputIEEE Journal of Solid-State Circuits, 1996