An improved algorithm for the normal contact stiffness and damping of a mechanical joint surface
Authors:
- 7 February 2014
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 228 (5) , 751-765
Abstract
The contact stiffness and damping play an important role in determining the dynamic characteristics at various mechanical joint surfaces in an assembly body. In this article, a bi-fractal model is proposed to overcome the drawbacks of the G-W and M-B models, which only considered the contacts that have the same fractal parameters for the joint surfaces. A surface impact coefficient is also introduced to calculate the real contact area from the microscopic and macroscopic perspectives, which can be used to obtain the contact stiffness and damping of rough surfaces by applying the contact formula between rough planes. In addition, the contact body is approximated to a number of asperities stacked on a base, similar to a series structure of two springs. The series structure can reasonably account for the limitations of the contact stiffness and damping at joint surfaces. With these improvements, this study establishes a more precise joint surface model determining the stiffness–load and damping–load relationships. An experiment is performed to compare the contact stiffness and damping determined from this theory with the experiment results. The theoretical values correspond well with the experimental values. The contact stiffness increases non-linearly with the load; the increase is initially quick and then slows down and stabilises. A value of D = 1.42 is obtained as an estimated critical value which determined the contact damping increase or decrease with load. The model can predict the trend in the contact stiffness and damping based on the loading to better prepare for a dynamic assembly analysis.Keywords
This publication has 26 references indexed in Scilit:
- A Contact Stiffness Model of Machined Plane Joint Based on Fractal TheoryJournal of Tribology, 2009
- Linear elastic contact of the Weierstrass profileProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2000
- Contact analysis of elastic-plastic fractal surfacesJournal of Applied Physics, 1998
- Identification of ’Effective’ Linear Joints Using Coupling and Joint Identification TechniquesJournal of Vibration and Acoustics, 1998
- Fractal Model of Elastic-Plastic Contact Between Rough SurfacesJournal of Tribology, 1991
- Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of SurfacesJournal of Tribology, 1990
- Adhesion of Contacting Rough Surfaces in the Presence of Sub-Boundary LubricationJournal of Tribology, 1990
- Adhesion Model for Metallic Rough SurfacesJournal of Tribology, 1988
- On the Weierstrass-Mandelbrot fractal functionProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1980
- The Elastic Contact of Rough SpheresJournal of Applied Mechanics, 1967