Condition Monitoring of the Torque Imbalance in a Dual-Stator Permanent Magnet Synchronous Motor for the Propulsion of a Lightweight Fixed-Wing UAV
Open Access
Abstract
This paper deals with the development of a model-based technique to monitor the condition of torque imbalances in a dual-stator permanent magnet synchronous motor for UAV full-electric propulsion. Due to imperfections, degradations or uncertainties, the torque split between power lines can deviate from the design, causing internal force-fighting and reduced efficiency. This study demonstrates that, by only elaborating the measurements of speed and direct/quadrature currents of the stators during motor acceleration/deceleration, online estimations of demagnetization and electrical angle misalignment can be obtained, thus permitting the evaluation of the imbalance and total torque of the system. A relevant outcome is that the technique can be used for developing both signal-based and model-based monitoring schemes. Starting from physical first-principles, a nonlinear model of the propulsion system, including demagnetization and electrical angle misalignment, is developed in order to analytically derive the relationships between monitoring inputs (currents and speed) and outputs (degradations). The model is experimentally validated using a system prototype characterized by asymmetrical demagnetization and electrical angle misalignment. Finally, the monitoring effectiveness is assessed by simulating UAV flight manoeuvres with the experimentally validated model: injecting different levels of degradations and evaluating the torque imbalance.Keywords
Funding Information
- Italian Government (Ministero Italiano dello Sviluppo Economico, MISE) (F/130088/01-05/X38)
This publication has 28 references indexed in Scilit:
- Demagnetization fault diagnosis in permanent magnet synchronous motors: A review of the state-of-the-artJournal of Magnetism and Magnetic Materials, 2015
- Online Loss-Minimization-Based Adaptive Flux Observer for Direct Torque and Flux Control of PMSM DriveIEEE Transactions on Industry Applications, 2015
- Demagnetization Analysis for Halbach Array Configurations in Electrical MachinesIEEE Transactions on Magnetics, 2015
- Fault tolerant control of double-stator-winding PMSM for open phase operation based on asymmetric current injection2014
- Influence of d- and q-axis currents on demagnetization in PM synchronous machines2013
- Safety-critical design of electromechanical actuation systems in commercial aircraftIET Electric Power Applications, 2011
- A compensation method for time delay of full-digital synchronous frame current regulator of PWM AC drivesIEEE Transactions on Industry Applications, 2003
- The state of the art of electric and hybrid vehiclesProceedings of the IEEE, 2002
- Three-dimensional space vector modulation for four-leg voltage-source convertersIEEE Transactions on Power Electronics, 2002
- An induction motor drive system with improved fault toleranceIEEE Transactions on Industry Applications, 2001