Prediction of Crack Initiation Life due to Corrosion Pits
Authors:
- 1 May 2014
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 51 (3) , 805-810
Abstract
Pitting corrosion may have an important influence on the structural integrity of different components used in civil, nuclear, and aerospace engineering because fatigue cracks usually initiate from corrosion pits. It was important to develop a responsible approach to predict the remaining life. An analytical model for the prediction of crack initiation life caused by pits under the interaction of fatigue load and a corrosive environment was proposed in this paper. The effect of the aspect ratio of the pit on the crack initiation life was considered in this model. Compared with the limited experimental data available in the literature, the crack initiation lives predicted by the proposed model agreed well with the experimental data.Keywords
This publication has 39 references indexed in Scilit:
- Fatigue analysis of a P180 aircraft main landing gear wheel flangeEngineering Failure Analysis, 2008
- Corrosion fatigue crack initiation in 12% chromium stainless steelMaterials Science and Engineering: A, 2007
- Failure analysis of stress corrosion cracking in aircraft boltsEngineering Failure Analysis, 2007
- Damage tolerance approach for probabilistic pitting corrosion fatigue life predictionEngineering Fracture Mechanics, 2001
- Comparative Study of Corrosion-Fatigue in Aircraft MaterialsAIAA Journal, 2001
- Corrosion Fatigue Crack Initiation in Aluminum Alloys 7075 and 7050Corrosion, 2000
- Surface crack subject to mixed mode loadingEngineering Fracture Mechanics, 2000
- Probabilistic Approach to Predicting Fatigue Lives of Corroded 2024-T3AIAA Journal, 1999
- Effect of pitting corrosion on fatigue crack initiation and fatigue lifeEngineering Fracture Mechanics, 1999
- A probability model for the growth of corrosion pits in aluminum alloys induced by constituent particlesEngineering Fracture Mechanics, 1998