Study of deleterious phase precipitation under continuous cooling of superduplex stainless steel UNS S32750
- 1 March 2012
- journal article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 28 (3) , 295-302
Abstract
Duplex and superduplex stainless steels have high strength and high corrosion resistance with a crescent demand in chemical and petrochemical industries. The best mechanical properties of this family of steels are obtained with approximately equal parts of ferrite and austenite. Grain refinement increases the toughness and resistance to environmentally assisted cracking. The precipitation of tertiary phases, such as σ, χ and secondary austenite, decreases the mechanical and corrosion resistance properties. The σ phase is the most dangerous of these deleterious phases and the one that precipitates in higher amounts. The majority of research works on deleterious phases in duplex and superduplex steels evaluate the kinetics of precipitation in specimens isothermally treated. In the present work, the precipitation of deleterious phases during continuous cooling from 1100°C was evaluated by optical and scanning electron microcopies, hardness measurements and electrochemical corrosion tests. Two superduplex stainless steel steels UNS S32750 with similar composition but quite different grain sizes were analysed in order to evaluate the influence of this microstructural feature.Keywords
This publication has 15 references indexed in Scilit:
- Deleterious phases precipitation on superduplex stainless steel UNS S32750: characterization by light optical and scanning electron microscopyMaterials Research, 2010
- Modeling of deleterious phase precipitation during isothermal treatments in superduplex stainless steelJournal of Materials Science, 2010
- Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel weldsMaterials Science and Engineering: A, 2003
- The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steelMaterials Science and Engineering: A, 2002
- Pin-hole and crack formation in a duplex stainless steel downhole toolEngineering Failure Analysis, 2001
- Magnetic property changes during embrittlement of a duplex stainless steelJournal of Alloys and Compounds, 2000
- Mechanical properties, microstructural stability and kinetics of σ-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steelMetallurgical and Materials Transactions A, 2000
- Influence of o-phase on mechanical properties and corrosion resistance of duplex stainless steelsCorrosion Science, 1999
- Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austeniteJournal of Alloys and Compounds, 1999
- Super duplex stainless steelsMaterials Science and Technology, 1992