Role of coefficient of thermal expansion on bond strength of ceramic veneered yttrium-stabilized zirconia
Authors:
Open Access
- 1 January 2018
- journal article
- Published by Medicina Oral, S.L. in Journal of Clinical and Experimental Dentistry
- Vol. 10 (3) , e279-e286
Abstract
Incompatible coefficient of thermal expansion (CTE) is supposed to be a reason for chipping of ceramic veneered zirconia. This study evaluates the effect of veneering ceramic at varied CTE on bond strength to zirconia. Zirconia disks (Z, Ø 10 mm, 1.0 mm thickness) were prepared from Y-TZP (Cercon®) and sintered at 1350°C for 6 hours. All zirconia disks were veneered with ceramics ((Ø 7.0 mm, 1.5 mm thickness) with varied CTE including VITADur® alpha (VDα), VITAVM®7 (VM7), VITAVM®9 (VM9), Cercon® ceramkiss (CCK), IPSe.max® ceram (IeC), and IPS dSIGN® (IdS) (n=15). The specimens were thermo-cycled (5-55 °C, 500 cycles) prior to determine the shear bond strength on a universal testing machine. The veneering ceramic and zirconia rods (Ø 4 mm, 30 mm length) were prepared for CTE evaluation. ANOVA and Tukey's multiple comparisons were used to determine the statistically significant difference (α=0.05). Weibull analysis was applied for survival probability, Weibull modulus (m), and characteristics strength (σo) of the shear bond. The interfaces were microscopically examined. The phase transformation of zirconia was determined using X ray diffraction. The mean±sd (MPa), m, and σo of bond strength were 20.45±2.32, 9.25, and 21.53 for Z-VDα, 19.47±4.53, 4.66, and 20.31 for Z-VM7, 21.05±3.96, 5.61, and 21.88 for Z-IeC, 25.85±2.74, 9.93, and 27.15 for Z-VM9, 25.82±4.39, 6.27, and 27.06 for Z-CCK, and 2.96±0.73, 4.11, and 3.28 for Z-IdS. The CTE (×10-6/°C) were 10.80, 7.83, 7.87, 9.86, 9.93, 10.03, and 12.95 for Z, VDα, VM7, IeC, VM9, CCK, and IdS. The bond strength was significantly affected by the CTE difference (p<0.05). The t→m phase transformation related with the CTE difference. The CTE's differences induced stress that affected the bond strength. CTE's compatibility of veneering ceramic to zirconia is crucial for enhancing the bond strength. The CTE difference approximately 0.77-0.87×10-6/°C was recommended. Key words:Bond strength, coefficient of thermal expansion, zirconia.Keywords
This publication has 26 references indexed in Scilit:
- Emerging Ceramic-based Materials for DentistryJournal of Dental Research, 2014
- Chipping behaviour of all-ceramic crowns with zirconia framework and CAD/CAM manufactured veneerJournal of Dentistry, 2012
- A Clinical Comparison of Zirconia, Metal and Alumina Fixed-Prosthesis Frameworks Veneered With Layered or Pressed CeramicThe Journal of the American Dental Association, 2010
- A comparison of bond strength of layered veneering porcelains to zirconia and metalThe Journal of Prosthetic Dentistry, 2010
- XRD2 micro-diffraction analysis of the interface between Y-TZP and veneering porcelain: Role of application methodsDental Materials, 2010
- Impact of thermal misfit on shear strength of veneering ceramic/zirconia compositesDental Materials, 2009
- Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocyclingDental Materials, 2008
- Effect of veneering method on the fracture and bond strength of bilayered zirconia restorations.2008
- Influence of thermal expansion mismatch and fatigue loading on phase changes in porcelain veneered Y‐TZP zirconia discsJournal of Oral Rehabilitation, 2007
- Effect of Thermal Misfit between Different Veneering Ceramics and Zirconia Frameworks on in vitro Fracture Load of Single CrownsDental Materials Journal, 2007