Effect of phase correction produced by trimming layer on thin-film bulk acoustic resonator
Authors:
Open Access
- 18 July 2024
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (3)
Abstract
This study investigates the influence of trimming layer thickness on the performance characteristics of thin-film bulk acoustic resonators (FBARs). By adjusting the thickness of the trimming layer, we aimed to optimize the resonant (fs) and antiresonant frequencies (fp), which are critical for the filter's performance in blocking or passing specific frequency bands. Employing theoretical modeling and experimental validation, we explored how variations in the trimming layer thickness affect the electromechanical coupling coefficient (kt2) and the overall energy efficiency of FBARs. The study also considered the impact of piezoelectric layer thickness on the effectiveness of these adjustments, revealing that thinner piezoelectric layers are more sensitive to changes in the trimming layer, enhancing the tuning capability for high-frequency applications. Our results confirm that reducing the trimming layer thickness increases both resonant and antiresonant frequencies, with a more pronounced effect on the latter, suggesting a significant phase correction effect from the trimming layer, resulting in the quality Q factor reductions. Our experimental results show that as the trimming layer thickness increases from 200 to 300 nm, the Q factor increases by 11%, while kt2 decreases by 4%. This research provides critical insights into the design and optimization of FBARs, offering guidelines that can help advance the development of more efficient and effective RF components for future mobile communication technologies.Keywords
This publication has 49 references indexed in Scilit:
- Advanced RF filters for wireless communicationsChip, 2023
- Influence of AlN/ScAlN piezoelectric multilayer on the electromechanical coupling of FBARMicro and Nanostructures, 2022
- Fifth-Generation Telecommunications Technologies: Features, Architecture, Challenges and SolutionsWireless Personal Communications, 2022
- A review of wireless communication using high-altitude platforms for extended coverage and capacityComputer Communications, 2020
- Piezoelectric MEMS based acoustic sensors: A reviewSensors and Actuators A: Physical, 2020
- Low insertion loss and high isolation capacitive RF MEMS switch with low pull-in voltageThe International Journal of Advanced Manufacturing Technology, 2017
- Wafer Level Chip Scale Packaging2016
- The AlN based solidly mounted resonators consisted of the all-metal conductive acoustic Bragg reflectorsVacuum, 2010
- Influence of the seed layer on structural and electro-acoustic properties of sputter-deposited AlN resonatorsThin Solid Films, 2009
- Epitaxial growth of AlN on single crystal Mo substratesThin Solid Films, 2008