Inhibition of Acid Corrosion of Pure Aluminum with 5-Benzylidine-1-Methyl-2-Methylthio-Imidazole-4-One
Authors:
- 1 June 1995
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 51 (6) , 436-440
Abstract
Inhibition of aluminum corrosion in 0.5 M hydrochloric acid (HCl) solution by 5-benzylidine-1-methyl-2-methylthio-imidazole-4-one was tested using weight loss and polarization resistance measurements. Results of tests for weight loss, polarization resistance, and volume of hydrogen evolution (VHE) indicated inhibitor efficiency (% P) increased with increasing inhibitor concentration, reaching a maximum inhibiting power of 82.5% at its highest values. The rate of aluminum corrosion increased with temperature in the absence and presence of the inhibitor The decrease in activation energy and increase in % P in the presence of the inhibitor with increasing temperature were indicative of the chemisorption of inhibitor molecules. The degree of surface coverage (θ) increased with increasing temperature and increased linearly with the logarithm of the inhibitor concentration, fitting a Temkin isotherm.Keywords
This publication has 16 references indexed in Scilit:
- Thiourea and substituted thioureas as corrosion inhibitors for aluminium in sodium nitrite solutionCorrosion Science, 1993
- Inhibition of aluminium corrosion in alkaline solutions by silicon and nitrogen containing compoundsCorrosion Science, 1993
- The application of 1-hydroxyimidazole-3-N-oxides as aluminium corrosion inhibitors in alkaline solutionsCorrosion Science, 1992
- Tosyl-hydrazine, 4-nitrobenzoyl-hydrazine and terephthalyl-hydrazine as inhibitors for the corrosion of copper and aluminium in sulphiric acidJournal of Applied Electrochemistry, 1991
- Influence of oxide bond energies on the kinetics of chemical dissolution of anodic oxides on valve metalsJournal of Applied Electrochemistry, 1988
- The role of some thiosemicarbazide derivatives in the corrosion inhibition of aluminium in hydrochloric acidCorrosion Science, 1986
- p-substituted phenols as corrosion inhibitors for aluminium-copper alloy in sodium hydroxideCorrosion Science, 1979
- Corrosion of aluminium in chloride solutions containing some anions—I. In 0.01M NaCl solutionsCorrosion Science, 1976
- Corrosion inhibition of 3s aluminium in trichloroacetic acid by methyl pyridinesCorrosion Science, 1974
- Efficiency of alkylamines and alkylammoniumions in retarding the dissolution of AlCorrosion Science, 1970