Molecular-scale investigation of the oxidation behavior of chromia-forming alloys in high-temperature CO2
Open Access
- 10 September 2021
- journal article
- research article
- Published by Springer Nature in npj Materials Degradation
- Vol. 5 (1) , 1-17
Abstract
Current and future power systems require chromia-forming alloys compatible with high-temperature CO2. Important questions concerning the mechanisms of oxidation and carburization remain unanswered. Herein we shed light onto these processes by studying the very initial stages of oxidation of Fe22Cr and Fe22Ni22Cr model alloys. Ambient-pressure X-ray photoelectron spectroscopy enabled in situ analysis of the oxidizing surface under 1 mbar of flowing CO2at temperatures up to 530 °C, while postexposure analyses revealed the structure and composition of the oxidized surface at the near-atomic scale. We found that gas purity played a critical role in the kinetics of the reaction, where high purity CO2promoted the deposition of carbon and the selective oxidation of Cr. In contrast, no carbon deposition occurred in low purity CO2and Fe oxidation ensued, thus highlighting the critical role of impurities in defining the early oxidation pathway of the alloy. The Cr-rich oxide formed on Fe22Cr in high purity CO2was both thicker and more permeable to carbon compared to that formed on Fe22Ni22Cr, where carbon transport appeared to occur by atomic diffusion through the oxide. Alternatively, the Fe-rich oxide formed in low purity CO2suggested carbon transport by molecular CO2.Keywords
Funding Information
- DOE | Office of Fossil Energy
This publication has 44 references indexed in Scilit:
- Effects of cerium and manganese on corrosion of Fe–Cr and Fe–Cr–Ni alloys in Ar–20CO2 gas at 818°CCorrosion Science, 2013
- Methane dry reforming with CO2 on CeZr-oxide supported Ni, NiRh and NiCo catalysts prepared by sol–gel technique: Relationship between activity and coke formationCatalysis Today, 2011
- Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and NiApplied Surface Science, 2011
- Effect of Alloy Composition and Exposure Conditions on the Selective Oxidation Behavior of Ferritic Fe–Cr and Fe–Cr–X AlloysOxidation of Metals, 2010
- Studies on coke formation and coke species of nickel-based catalysts in CO2 reforming of CH4Catalysis Letters, 2007
- Immiscibility in the Fe3O4–FeCr2O4 spinel binaryJournal of Physics and Chemistry of Solids, 2003
- Determination of the sp3/sp2 ratio of a-C:H by XPS and XAESJournal of Non-Crystalline Solids, 1999
- Crystallization of amorphous carbon in carbon—cobalt layered thin filmsActa Metallurgica et Materialia, 1995
- A study on the solubility and distribution of carbon in oxidesSolid State Communications, 1985
- The high-temperature oxidation of iron-chromium-nickel alloys containing 0?30% chromiumOxidation of Metals, 1972