Generation of coarse‐scale continuum flow models from detailed fracture characterizations
- 20 October 2006
- journal article
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 42 (10)
Abstract
A procedure for developing coarse‐scale continuum models from detailed fracture descriptions is developed and applied. The coarse models are in the form of a generalized dual‐porosity representation, in which matrix rock and fractures exchange fluid locally while large‐scale flow occurs through the fracture network. The methodology developed here introduces local subgrids to resolve dynamics within the matrix and provides appropriate coarse‐scale parameters describing fracture‐fracture, matrix‐fracture, and matrix‐matrix flow. The geometry of the local subgrids, as well as the required parameters for the coarse‐scale model, are determined from local flow solutions using the underlying discrete fracture model. The method is applied to two‐ and three‐dimensional single‐phase and two‐phase flow problems, and the accuracy of the coarse models is assessed relative to fully resolved discrete fracture simulations. For the cases considered, it is shown that the technique is capable of generating highly accurate coarse models with many fewer unknowns than the detailed characterizations, and speedups of about a factor of 100 are achieved.Keywords
This publication has 34 references indexed in Scilit:
- Flow and transport effects of compaction bands in sandstone at scales relevant to aquifer and reservoir managementWater Resources Research, 2006
- MODELING FLUID FLOW IN OIL RESERVOIRSAnnual Review of Fluid Mechanics, 2005
- Control‐volume method for numerical simulation of two‐phase immiscible flow in two‐ and three‐dimensional discrete‐fractured mediaWater Resources Research, 2004
- Two-phase flow through fractured porous mediaPhysical Review E, 2003
- Effective permeability of fractured porous media in steady state flowWater Resources Research, 2003
- Upscaling: a reviewInternational Journal for Numerical Methods in Fluids, 2002
- Characterizing flow and transport in fractured geological media: A reviewAdvances in Water Resources, 2002
- A Rapid and Efficient Methodology to Convert Fractured Reservoir Images Into a Dual-Porosity ModelRevue de l'Institut Français du Pétrole, 1998
- Triangle: Engineering a 2D quality mesh generator and Delaunay triangulator1996
- A numerical dual‐porosity model with semianalytical treatment of fracture/matrix flowWater Resources Research, 1993