Extrusion Forming, Microstructure Evolution, and Mechanical Properties of Al Core Reinforced Mg Matrix Composites
Authors:
- 6 February 2025
- journal article
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (7)
Abstract
Al core reinforced Mg matrix composites are successfully prepared by composite extrusion process. The microstructures of single Mg and Mg/Al composites are characterized and compared. The properties of composites with different volume fractions (Al core) are studied. The strengthening mechanism of composites and the effect of composite extrusion on texture and microstructure are discussed. The research shows that the addition of Al core refines the grains of Mg matrix, but does not change the deformation texture type of Mg matrix. The thickness of Mg/Al interface bonding layer is about 18 μm, and there are intermetallic compounds (Al 3 Mg 2 , Al 12 Mg 17 ). As the volume fraction of the Al core increases, the yield strength and compressive strength of the Mg/Al composites are improved. The strengthening effect of Al core on Mg matrix is dislocation strengthening mechanism, fine grain strengthening mechanism, and load transfer effect.Keywords
This publication has 46 references indexed in Scilit:
- Microstructure and mechanical properties of steel wire reinforced Mg matrix composites fabricated by composite extrusionComposites Communications, 2023
- A synergetic approach to nullify tension to compression yield asymmetry of Mg matrix composite by in-situ TiB2 reinforcement and microstructural modificationComposites Part B: Engineering, 2022
- A Continuous Extrusion‐Shear (ES) Composite Process for Significantly Improving the Metallurgical Bonding and Textures Regulations and Grain Refinements of Al/Mg Bimetallic Composite RodsAdvanced Engineering Materials, 2022
- Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticlesComposites Part B: Engineering, 2020
- Enhanced Performance of Mg–Zn–Y–Mn Alloy via Minor Ca AdditionAdvanced Engineering Materials, 2019
- An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium compositesComposite Structures, 2019
- Improving the Ductility of Mg–Gd–Y–Zr Alloy through Extrusion and a Following RollingAdvanced Engineering Materials, 2018
- Strengthening behavior of few-layered graphene/aluminum compositesCarbon, 2015
- Stress fields and geometrically necessary dislocation density distributions near the head of a blocked slip bandActa Materialia, 2012
- Effect of submicron size Al2O3 particulates on microstructural and tensile properties of elemental MgJournal of Alloys and Compounds, 2008