Solar cells with thin Cu(In1-xGax)Se2 absorbers: Optical analysis and quantum efficiency simulations
- 1 June 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01608371,p. 0373-0378
Abstract
We present in-depth quantum efficiency analyses of of Cu(In,Ga)Se 2 (CIGS) solar cells. Ex-situ spectroscopic ellipsometry (SE) analysis is applied to partially and fully completed solar cells with standard thickness and thin CIGS absorbers. Optical properties and multilayer structural data are deduced and used to predict the maximum obtainable quantum efficiency spectra and short-circuit current densities (J sc ). We validate optical model development and the resulting quantum efficiency (QE) simulations with experimental results for CIGS solar cells incorporating standard 2.2 μm thick absorbers. We find that both the bulk CIGS layer and the CdS-CIGS interface layer serve as active layer components and together contribute 100% of the photo-generated current. Thus, essentially all photo-generated carriers are collected from these layers. Solar cells with thin absorbers were also fabricated and efficiencies of 13.2% at 0.73 μm CIGS thickness, 10.1% at 0.50 μm and 8.0% at 0.36 μm were obtained. Although J sc is expected to decrease with decreasing absorber thickness due to reduced optical collection, modeling results suggest that electronic losses are also occurring upon thinning the absorber, ranging from ~ 1.3 to 1.9 mA/cm 2 for cells with CIGS thicknesses from 0.73 to 0.36 μm, respectively.Keywords
This publication has 10 references indexed in Scilit:
- Compositional investigation of potassium doped Cu(In,Ga)Se2solar cells with efficiencies up to 20.8%Physica Status Solidi (RRL) – Rapid Research Letters, 2014
- Real-Time, In-Line, and Mapping Spectroscopic Ellipsometry for Applications in Cu(In $_{{\bf 1}-{\bm x}}$Ga$_{\bm x}$ )Se$_{\bf 2}$ MetrologyIEEE Journal of Photovoltaics, 2013
- Optical approaches to improve the photocurrent generation in Cu(In,Ga)Se2 solar cells with absorber thicknesses down to 0.5 μmJournal of Applied Physics, 2012
- Optical Monitoring and Control of Three-Stage Coevaporated Cu(In $_{\bm {1-x}}$Ga$_{\bm x}$)Se $_{\bf 2}$ by Real-Time Spectroscopic EllipsometryIEEE Journal of Photovoltaics, 2012
- Large-Area Compositional Mapping of Cu(In$_{1-x}$Ga $_{x}$)Se $_{2}$ Materials and Devices with Spectroscopic EllipsometryIEEE Journal of Photovoltaics, 2012
- Quantum efficiency simulations from on-line compatible mapping of thin-film solar cells2011
- Potential of submicrometer thickness Cu(In,Ga)Se2 solar cellsJournal of Applied Physics, 2005
- Influence of the Cu(In,Ga)Se2thickness and Ga grading on solar cell performanceProgress in Photovoltaics: Research and Applications, 2002
- Back surface band gap gradings in Cu(In,Ga)Se2 solar cellsThin Solid Films, 2001
- Effects of Ga addition to CuInSe2 on its electronic, structural, and defect propertiesApplied Physics Letters, 1998