Extraction and Characterisation of Maltene from Virgin Asphalt as a Potential Rejuvenating Agent
Authors:
- Zaid Hazim Al-SaffarZaid Hazim Al-Saffar
- Haryati YaacobHYHaryati Yaacob
- Mohammed S. Al JawaheryMohammed S. Al Jawahery
- Salim T. YousifSalim T. Yousif
- Mohd Khairul Idham Mohd SatarMSMohd Khairul Idham Mohd Satar
- Ramadhansyah Putra JayaRamadhansyah Putra Jaya
- Hassanain Radhi RadeefHRHassanain Radhi Radeef
- Ahmed Salama EltwatiAhmed Salama Eltwati
- Ekarizan ShaffieESEkarizan Shaffie
Open Access
- 4 January 2023
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 15 (2) , 909
Abstract
The wide application of reclaimed asphalt pavement (RAP) is hindered due to the highly brittle nature of the material, which contributes a major factor towards cracking-related distresses. While the utilisation of rejuvenating agents has been shown to enhance the flexibility of RAP, they also trigger certain negative effects on the performance of asphalt mixtures. In view of this, potential rejuvenators should be able to alter the rheological properties of asphalts to limit fatigue issues and enhance the potential of low-temperature cracking. Therefore, this study aimed to investigate the possibility of extraction and characterisation of maltene from virgin asphalt (VA) as a potential rejuvenating agent in RAP. Several physicochemical characteristics were examined, including density, viscosity, gas chromatography–mass spectrometry (GC–MS), Fourier-transform infrared (FTIR) spectroscopy, CHNS elemental analysis, and energy dispersive X-ray (EDX) analysis. Finally, the stiffness modulus characteristics of the different types of asphalt binders were evaluated at low and high temperatures. The results demonstrated that maltene was successfully extracted from VA using petroleum ether. In addition, the GC–MS showed that the extracted maltene contained polar and non-polar compounds with low molecular weights compared to VA. Furthermore, the spectra curve of maltene was very similar to that of asphalt, indicating its compatibility with asphalt binder and prospective use. Finally, adding maltene to aged asphalt decreased stiffness values to 0.0063, 0.0499, and 0.0108 MPa, which are equivalent to VA values (0.0061, 0.0481, and 0.0104 MPa) at loading times of 1.0, 0.1, and 0.55 s, respectively. Meanwhile, the stiffness modulus characteristics at low temperature were restored with the addition of maltene.Keywords
Funding Information
- Ministry of Higher Education, Malaysia (FRGS/1/2022/TK01/UTM/02/1, PGRS210375)
- Universiti Malaysia Pahang (FRGS/1/2022/TK01/UTM/02/1, PGRS210375)
This publication has 57 references indexed in Scilit:
- The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixturesConstruction and Building Materials, 2014
- Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixturesConstruction and Building Materials, 2014
- Infrared spectra and rheological properties of asphalt cement containing waste engine oil residuesConstruction and Building Materials, 2014
- Evaluation of Rejuvenator's Effectiveness with Conventional Mix Testing for 100% Reclaimed Asphalt Pavement MixturesTransportation Research Record: Journal of the Transportation Research Board, 2013
- Chemical Characterization of Biobinder from Swine Manure: Sustainable Modifier for Asphalt BinderJournal of Materials in Civil Engineering, 2011
- Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixturesConstruction and Building Materials, 2009
- The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modificationAdvances in Colloid and Interface Science, 2009
- Asphalt modification with used lubricating oilCanadian Journal of Civil Engineering, 2008
- Maltenes and Asphaltenes of Petroleum Vacuum Residues: Physico-Chemical CharacterizationPetroleum Science and Technology, 2007
- Catalytic (Mo) upgrading of Athabasca bitumen vacuum bottoms via two-step hydrocracking and enhancement of Mo–heavy oil interactionFuel, 2004