Study on X-ray Induced Two-Dimensional Thermal Shock Waves in Carbon/Phenolic
Open Access
Abstract
Carbon/Phenolic (C/P), a typical anisotropic material, is an important component of aerospace and often used to protect the thermodynamic effects of strong X-ray radiation. In this paper, we establish the anisotropic elastic-plastic constitutive model, which is embedded in the in-house code “RAMA” to simulate a two-dimensional thermal shock wave induced by X-ray. Then, we compare the numerical simulation results with the thermal shock wave stress generated by the same strong current electron beam via experiment to verify the correctness of the numerical simulation. Subsequently, we discuss and analyze the rules of thermal shock wave propagation in C/P material by further numerical simulation. The results reveal that the thermal shock wave represents different shapes and mechanisms by the radiation of 1 keV and 3 keV X-rays. The vaporization recoil phenomenon appears as a compression wave under 1 keV X-ray irradiation, and X-ray penetration is caused by thermal deformation under 3 keV X-ray irradiation. The thermal shock wave propagation exhibits two-dimensional characteristics, the energy deposition of 1 keV and 3 keV both decays exponentially, the energy deposition of 1 keV-peak soft X-ray is high, and the deposition depth is shallow, while the energy deposition of 3 keV-peak hard X-ray is low, and the deposition depth is deep. RAMA can successfully realize two-dimensional orthotropic elastoplastic constitutive relation, the corresponding program was designed and checked, and the calculation results for inspection are consistent with the theory. This study has great significance in the evaluation of anisotropic material protection under the radiation of intense X-rays.Keywords
Funding Information
- key project of Intergovernmental International Scientific and Technological Innovation Cooperation in China (2016YFE0128900)
- National Natural Science Foundation of China (11775166)
This publication has 13 references indexed in Scilit:
- Numerical Simulation of Thermal Shock Waves Induced by Pulsed X-ray in C/PF MaterialsJournal of Physics: Conference Series, 2021
- Design and application of composite platform with extreme low thermal deformation for satelliteComposite Structures, 2016
- Effect of reinforcement continuity on the ballistic performance of composites reinforced with multiply plain weave fabricComposites Part B: Engineering, 2016
- An equation of state for anisotropic solids under shock loadingThe European Physical Journal B, 2008
- Constitutive behaviour of anisotropic materials under shock loadingInternational Journal of Plasticity, 2008
- Stress intensity factor analysis of an interface crack between dissimilar anisotropic materials under thermal stress using the finite element analysisInternational Journal of Fracture, 2007
- Numerical simulation of hypervelocity impact on CFRP/Al HC SP spacecraft structures causing penetration and fragment ejectionInternational Journal of Impact Engineering, 2006
- Hypervelocity impact damage prediction in composites: Part I—material model and characterisationInternational Journal of Impact Engineering, 2006
- Hypervelocity impact damage prediction in composites: Part II—experimental investigations and simulationsInternational Journal of Impact Engineering, 2006
- A computational analysis of the ballistic performance of light-weight hybrid composite armorsApplied Surface Science, 2006