In Situ Study the Electrochemical Migration of Tin under Unipolar Square Wave Electric Field
Authors:
- 12 September 2013
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (11) , D495-D500
Abstract
Electrochemical migration (ECM) behaviors of tin under unsteady state electric field were investigated via thin electrolyte layer (TEL) method using optical and electrochemical techniques. Unipolar square waves with various time periods and duty cycles were first used as the unsteady state electric field for ECM investigation, where a 3-V-bias and a 0-V-bias were applied across the two electrodes during the ON time and OFF time, respectively. The results show that there is a reverse polarization applied across the two electrodes during the OFF time to ensure the 0-V-bias. The presence of reverse polarization will result in ions migration reverse to their original migration direction and the tin ions that migrated back may even be reduced back to metal tin. Therefore, the reverse polarization is adverse to the ECM process of tin. At the same time period, the rate of dendrites growth increases with the increase of duty cycle. While, for the same duty cycle, the prolongation of time period is favorable for the precipitates formation and/or dendrites growth. The influence mechanisms of time period and duty cycle on ECM behaviors have also been proposed, respectively.Keywords
This publication has 27 references indexed in Scilit:
- On the electrochemical migration mechanism of tin in electronicsCorrosion Science, 2011
- Electrochemical migration behaviour of Cu, Sn, Ag and Sn63/Pb37Journal of Materials Science: Materials in Electronics, 2011
- Electrochemical migration of tin in electronics and microstructure of the dendritesCorrosion Science, 2011
- In situ optical inspection of electrochemical migration during THB testsJournal of Materials Science: Materials in Electronics, 2010
- Effect of Bias Voltage on the Electrochemical Migration Behaviors of Sn and PbIEEE Transactions on Device and Materials Reliability, 2009
- Electrochemical Migration on Electronic Chip Resistors in Chloride EnvironmentsIEEE Transactions on Device and Materials Reliability, 2009
- Evaluation of Electrochemical Migration on Flexible Printed Circuit Boards with Different Surface FinishesJournal of Electronic Materials, 2009
- Characteristics of environmental factor for electrochemical migration on printed circuit boardJournal of Materials Science: Materials in Electronics, 2007
- Electrochemical migration characteristics of eutectic SnPb solder alloy in printed circuit boardThin Solid Films, 2006
- Comparing migratory resistive short formation abilities of conductor systems applied in advanced interconnection systemsMicroelectronics Reliability, 2001