Methods to Estimate Surface Roughness Length for Offshore Wind Energy
Open Access
- 4 April 2019
- journal article
- research article
- Published by Wiley in Advances in Meteorology
- Vol. 2019, 1-15
Abstract
The northeastern coast of the U.S. is projected to expand its offshore wind capacity from the existing 30 MW to over 22 GW in the next decade, yet, only a few wind measurements are available in the region and none at hub height (around 100 m today); thus, extrapolations are needed to estimate wind speed as a function of height. A common method is the log-law, which is based on surface roughness length (). No reliable estimates of for the region have been presented in the literature. Here, we fill this knowledge gap using two field campaigns that were conducted in the Nantucket Sound at the Cape Wind (CW) platform: the 2003–2009 “CW Historical”, which collected wind measurements on a meteorological tower at three levels (20, 41, and 60 m AMSL) with sonic and cup/vane anemometers, and the 2013–2014 IMPOWR (Improving the Mapping and Prediction of Offshore Wind Resources), which collected high-frequency wind and flux measurements at 12 m AMSL. We tested three different methods to calculate : (1) analytical method, dependent on friction velocity and a stability function ψ; (2) the Charnock relationship between and ; and (3) a statistical method based on wind speed observed at the three levels. The first two methods are physical, whereas the statistical method is purely mathematical. Comparing mean and median of , we find that the median is a more robust statistics because the mean varies by over four orders of magnitude across the three methods and the two campaigns. In general, the median exhibits little seasonal variability and a weak dependency on atmospheric stability, which was predominantly unstable (54–67%). With the goal of providing the most accurate estimates of wind speed near the hub height of modern turbines, the statistical method, despite delivering unrealistic values at times, gives the best estimates of 60 m winds, even when the 5 m wind speed from a nearby buoy is used as the reference. The unrealistic values are caused by nonmonotonic wind speed profiles, occurring about 41% of the time, and should not be rejected because they produce realistic fits. Furthermore, the statistical method outperforms the other two even though it does not need any stability information. In summary, if wind speed data from multiple levels are available, as is the case with vertically pointing floating lidar and meteorological towers, the statistical method is recommended, regardless of the seemingly unrealistic values at times. If multilevel wind speeds are not available but advanced sonic anemometry is available at one level, the analytical method is recommended over Charnock’s. Lastly, if a single, constant value of is sought after to characterize the region, we recommend the median from the statistical method, i.e., , which is typical of rough seas.
Keywords
All Related Versions
Funding Information
- University of Delaware (18A00378)
- Delaware Natural Resources and Environmental Control (18A00378)
This publication has 24 references indexed in Scilit:
- Effect of island topography and surface roughness on the estimation of annual energy production of offshore wind farmsRenewable Energy, 2017
- On the predominance of unstable atmospheric conditions in the marine boundary layer offshore of the U.S. northeastern coastJournal of Geophysical Research: Atmospheres, 2016
- Improving the Mapping and Prediction of Offshore Wind Resources (IMPOWR): Experimental Overview and First ResultsBulletin of the American Meteorological Society, 2016
- On the Exchange of Momentum over the Open OceanJournal of Physical Oceanography, 2013
- Quantifying trends in surface roughness and the effect on surface wind speed observationsJournal of Geophysical Research: Atmospheres, 2012
- Toward Objective, Standardized Intensity Estimates from Surface Wind Speed ObservationsBulletin of the American Meteorological Society, 2010
- Importance of thermal effects and sea surface roughness for offshore wind resource assessmentJournal of Wind Engineering and Industrial Aerodynamics, 2004
- A New Empirical Formula for the Aerodynamic Roughness of Water Surface WavesJournal of Oceanography, 2003
- Simulated wind power off-shore using different parametrizations for the sea surface roughnessWind Energy, 2000
- Laboratory studies of wind–wave interactionsJournal of Fluid Mechanics, 1968