Seismic design factor for sliding of waterfront retaining wall
- 1 October 2009
- journal article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- Vol. 162 (5) , 269-276
Abstract
A detailed methodology is presented for obtaining seismic design factors for sliding of a waterfront retaining wall using the pseudodynamic approach, which considers the effects of period of lateral shaking, shear and primary wave velocities, time, and seismic accelerations. Water is considered on both the upstream and downstream sides of the wall. Results are presented in terms of design factors for sliding: thrust factor FTwet, inertia factor FIwet, and the combined dynamic factor FWwet. Using FWwet, the weight of the wall needed to maintain stability against sliding under seismic conditions is obtained. The variation in upstream and downstream water heights seriously challenges the sliding stability of the wall. Variation in the horizontal and vertical seismic acceleration coefficients, soil and wall friction angles, and period of lateral shaking have a significant effect on the stability design factors, whereas the effect of pore pressure ratio was found to be a minimum. The weight of the wall needed for a kh of 0·3 is almost double what would be needed if kh were zero. Comparison of results shows a good match with an existing methodology, but for the dry backfill case with no upstream water. Results for the wet case are claimed to be unique.Keywords
This publication has 13 references indexed in Scilit:
- Seismic design of retaining wall by considering wall-soil inertia for active caseInternational Journal of Geotechnical Engineering, 2008
- Stability of Waterfront Retaining Wall Subjected to Pseudodynamic Earthquake ForcesJournal of Waterway, Port, Coastal, and Ocean Engineering, 2008
- Stability of waterfront retaining wall subjected to pseudo-static earthquake forcesOcean Engineering, 2007
- Sliding stability and seismic design of retaining wall by pseudo-dynamic method for passive caseSoil Dynamics and Earthquake Engineering, 2007
- Seismic rotational displacement of gravity walls by pseudo-dynamic method: Passive caseSoil Dynamics and Earthquake Engineering, 2007
- Pseudo-dynamic approach of seismic active earth pressure behind retaining wallGeotechnical and Geological Engineering, 2006
- Seismic passive resistance by pseudo-dynamic methodGéotechnique, 2005
- Rotation of Large Gravity Walls on Rigid Foundations under Seismic Loading1996
- The influence of phase on the calculation of pseudo-static earth pressure on a retaining wallGéotechnique, 1990
- Effects of Earthquakes on Dams and EmbankmentsGéotechnique, 1965