Measurement of Distorted Power-Frequency Electric Field With Integrated Optical Sensor
- 22 August 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 68 (4) , 1132-1139
Abstract
The measurement of the distorted power-frequency electric field needs to meet some special requirements such as appropriate insulation, quick response, passive measurement, and small size. In this paper, based on the Pockels effect, an integrated optical sensor is designed and used for measuring distorted power-frequency electric field for the first time. The input-output characteristic, frequency response, and temperature characteristic of the sensor are studied. The data show that the sensor has a linear measurable range from 100 V/m to 27 kV/m, a 3-dB bandwidth from 20 Hz to 10 MHz, with good temperature stability. The developed sensor is used to measure the distorted electric field and is compared with the Narda-NBM-550 sensor. The relative errors between the measured values of these two sensors and the simulation values obtained by the finite-element method are calculated. It is noted that the relative errors of the integrated optical sensor in different positions are within 12%. However, the Narda-NBM-550 sensor performs poorly at the edges of the barrier with an error of 22%. In conclusion, the findings demonstrate that the integrated optical sensor developed in this paper is more suitable for measuring distorted power-frequency electric field than the Narda-NBM-550 sensor. Further research needs to focus on the measurement of the 3-D distorted power-frequency electric field.Keywords
Funding Information
- National Natural Science Foundation of China (51707006)
- SGCC Science and Technology Project of China (GY71-16-010)
This publication has 41 references indexed in Scilit:
- Development and Application of Integrated Optical Sensors for Intense E-Field MeasurementSensors, 2012
- A new electrostatic field measurement method: The coherent-notch field millJournal of Electrostatics, 2007
- Analysis of Electric Field Distribution Around the High-Voltage Overhead Transmission Lines With an ADSS Fiber-Optic CableIEEE Transactions on Power Delivery, 2004
- Study of population exposure to magnetic fields due to secondary utilization of transmission line corridorsIEEE Transactions on Power Delivery, 1995
- New developments on the combined application of charge simulation and numerical methods for the computation of electric fieldsIEEE Transactions on Power Delivery, 1995
- Two new designs of 'field mill' type fieldmeters not requiring earthing of rotating chopperIEEE Transactions on Industry Applications, 1990
- Application of current simulation method for calculating magnetic field of superconducting AC generatorIEEE Transactions on Magnetics, 1989
- Electromagnetic interference from transmission lines located in central region of Saudia ArabiaIEEE Transactions on Power Delivery, 1989
- A remote sensor for the three components of transient electric fieldsIEEE Transactions on Industrial Electronics, 1988
- Modified 1×2 directional coupler waveguide modulatorElectronics Letters, 1986