SiOyNx/SiNxstack: a promising surface passivation layer for high‐efficiency and potential‐induced degradation resistant mc‐silicon solar cells

Authors:

Abstract
A thin SiOyNxfilm was inserted below a conventional SiNxantireflection coating used in c‐Si solar cells in order to improve the surface passivation and the solar cell's resistance to potential‐induced degradation (PID). The effect of varying the flow ratio of the N2O and SiH4precursors and the deposition temperature for the SiOyNxthin film upon material properties were systematically investigated. An excellent surface passivation was obtained on FZ p‐type polished silicon wafers, with the best results obtained with a SiOyNxfilm deposited at a very low temperature of 130 °C and with an optical refractive index of 1.8. In the SiOyNx/SiNxstack structure, a SiOyNxfilm with ~6 nm thickness is sufficient to provide excellent surface passivation with an effective surface recombination velocity Seff < 2 cm/s. Furthermore, we applied the optimized SiOyNx/SiNxstack on multicrystalline Si solar cells as a surface passivation and antireflection coating, resulting in a 0.5% absolute average conversion efficiency gain compared with that of reference cells with conventional SiNxcoating. Moreover, the cells with the SiOyNx/SiNxstack layers show a significant increase in their resistance to PID. Nearly zero degradation in shunt resistance was obtained after 24 h in a PID test, while a single SiNx‐coated silicon solar cell showed almost 50% degradation after 24 h. Copyright © 2016 John Wiley & Sons, Ltd.
Funding Information
  • Norges Forskningsråd (221668/E20, 193829/E20)

This publication has 17 references indexed in Scilit: