Atomistic modeling of thermomechanical properties of SWNT/Epoxy nanocomposites
- 17 July 2015
- journal article
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 23 (6) , 065003
Abstract
Molecular dynamics simulations are performed to compute thermomechanical properties of cured epoxy resins reinforced with pristine and covalently functionalized carbon nanotubes. A DGEBA-DDS epoxy network was built using the ‘dendrimer’ growth approach where 75% of available epoxy sites were cross-linked. The epoxy model is verified through comparisons to experiments, and simulations are performed on nanotube reinforced cross-linked epoxy matrix using the CVFF force field in LAMMPS. Full stiffness matrices and linear coefficient of thermal expansion vectors are obtained for the nanocomposite. Large increases in stiffness and large decreases in thermal expansion were seen along the direction of the nanotube for both nanocomposite systems when compared to neat epoxy. The direction transverse to nanotube saw a 40% increase in stiffness due to covalent functionalization over neat epoxy at 1 K whereas the pristine nanotube system only saw a 7% increase due to van der Waals effects. The functionalized SWNT/epoxy nanocomposite showed an additional 42% decrease in thermal expansion along the nanotube direction when compared to the pristine SWNT/epoxy nanocomposite. The stiffness matrices are rotated over every possible orientation to simulate the effects of an isotropic system of randomly oriented nanotubes in the epoxy. The randomly oriented covalently functionalized SWNT/Epoxy nanocomposites showed substantial improvements over the plain epoxy in terms of higher stiffness (200% increase) and lower thermal expansion (32% reduction). Through MD simulations, we develop means to build simulation cells, perform annealing to reach correct densities, compute thermomechanical properties and compare with experiments.Keywords
This publication has 49 references indexed in Scilit:
- Synthesis of epoxy composites with high carbon nanotube loading and effects of tubular and wavy morphology on composite strength and modulusPolymer, 2011
- Asymmmetric Diamino Functionalization of Nanotubes Assisted by BOC Protection and Their Epoxy NanocompositesAdvanced Functional Materials, 2010
- Modification of epoxy resins via m‐chloroperbenzoic acid‐epoxidized carbon nanotubesJournal of Applied Polymer Science, 2009
- Mechanical and Dilatometric Properties of Carboxylated SWCNT/Epoxy Composites: Effects of the Dispersion in the Resin and in the HardenerJournal of Reinforced Plastics and Composites, 2009
- A Molecular Dynamics Study of Epoxy-Based Networks: Cross-Linking Procedure and Prediction of Molecular and Material PropertiesMacromolecules, 2008
- Molecular Dynamics Simulations of Polymer Networks Undergoing Sequential Cross-Linking and Scission ReactionsMacromolecules, 2007
- Study of the isothermal curing of an epoxy prepreg by near‐infrared spectroscopyJournal of Applied Polymer Science, 2003
- Computer simulation of structure and properties of crosslinked polymers: application to epoxy resinsPolymer, 2002
- Characterization of the cure‐state of DGEBA‐DDS epoxy using ultrasonic, dynamic mechanical, and thermal probesPolymer Engineering & Science, 2002
- ChemInform Abstract: Structure and Electronic Properties of Carbon NanotubesChemInform, 2000