Finite Element Investigation on Cutting Force and Residual Stress in 3D Elliptical Vibration Cutting Ti6Al4V
Open Access
- 8 August 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (8) , 1278
Abstract
Titanium alloy is a typical difficult-to-machine material with features of superhigh strength and hardness, and low elastic modulus. It is difficult to guarantee the processing quality and efficiency due to the high cutting force and tool wear in conventional cutting. Elliptical vibration cutting (EVC) as an effective method can improve the machinability of titanium alloys. In this paper, the finite element method (FEM) was adopted to study the cutting force and residual stress of 3D EVC in machining of Ti6Al4V. The Johnson-Cook constitutive model was utilized to illustrate the plastic behavior of Ti6Al4V alloy. The kinematics of the 3D EVC was described, and then the influence of various cutting speeds, vibration amplitudes, vibration frequencies and depths of cut on cutting force and residual stress were carried out and analyzed. The simulation results show that the cutting speed, vibration amplitude a, vibration frequency and depth of cut have larger effect on principal force. In addition, the compressive stress layer can be easily obtained near the machined surface by using 3D EVC, which is helpful to improve the working performance of workpiece.Keywords
Funding Information
- National Natural Science Foundation of China (51905322)
- China Postdoctoral Science Foundation (2021T140420)
This publication has 39 references indexed in Scilit:
- Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure modelThe International Journal of Advanced Manufacturing Technology, 2011
- Mirror finishing of Co–Cr–Mo alloy using elliptical vibration cuttingPrecision Engineering, 2010
- Elliptical Vibration Cutting of Tungsten Alloy Molds for Optical Glass PartsCIRP Annals, 2007
- Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration CuttingMaterials Science Forum, 2004
- Residual stresses and strains in orthogonal metal cuttingInternational Journal of Machine Tools and Manufacture, 2003
- Wear Mechanisms of New Tool Materials for Ti-6AI-4V High Performance MachiningCIRP Annals, 2003
- Ultaprecision Diamond Cutting of Hardened Steel by Applying Elliptical Vibration CuttingCIRP Annals, 1999
- High-temperature deformation behaviour of Ti6Al4V alloy evaluated by high strain-rate compression testsJournal of Materials Processing Technology, 1998
- Study on Elliptical Vibration CuttingCIRP Annals, 1994
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976