The effect of micro-porous layers on the performance of proton exchange membrane fuel cells
Authors:
- 1 March 2010
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 224 (2) , 179-184
Abstract
Micro-porous layers (MPLs) of varying porosities were prepared on wet-proof carbon paper in order to investigate the effect of porosity on proton exchange membrane fuel cells. Pore size distribution in the gas diffusion electrode (GDE) layer was shown to have a bimodal distribution at approximately 0.01 and 0.08 μm. It appears that the smaller pores transfer gas and the larger pores remove water by capillary action. An appropriate amount of NH4Cl (50 wt%) in the MPL can therefore improve fuel cell performance because an optimum compromise can be found between water—gas transfer and internal resistance. Further increasing the NH4Cl content and porosity does not improve performance because internal resistance rises.Keywords
This publication has 13 references indexed in Scilit:
- Evaluation of polymer electrolyte fuel cell application technology R&Ds by GERT analysisInternational Journal of Hydrogen Energy, 2005
- The U.S. Department of Energy, Office of Fossil Energy Stationary Fuel Cell ProgramJournal of Power Sources, 2005
- Autothermal reforming as a hydrocarbon fuel processing option for PEM fuel cellJournal of Power Sources, 2003
- Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cellsJournal of Power Sources, 2002
- Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cellsJournal of Power Sources, 2002
- Improvement of water management by a microporous sublayer for PEM fuel cellsJournal of Power Sources, 2002
- Platinum electrodeposition for polymer electrolyte membrane fuel cellsElectrochimica Acta, 2001
- Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performanceElectrochimica Acta, 2001
- Diffusion layer parameters influencing optimal fuel cell performanceJournal of Power Sources, 2000
- Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cellsElectrochimica Acta, 1998