On the Post-Processing of 3D-Printed ABS Parts
Open Access
Abstract
Application of Additive Manufacturing (AM) has significantly increased in the past few years. AM also known as three-dimensional (3D) printing has been currently used in fabrication of prototypes and end-use products. Considering the new applications of additively manufactured components, it is necessary to study structural details of these parts. In the current study, influence of a post-processing on the mechanical properties of 3D-printed parts has been investigated. To this aim, Acrylonitrile Butadiene Styrene (ABS) material was used to produce test coupons based on the Fused Deposition Modeling (FDM) process. More in deep, a device was designed and fabricated to fix imperfection and provide smooth surfaces on the 3D-printed ABS specimens. Later, original and treated specimens were subjected to a series of tensile loads, three-point bending tests, and water absorption tests. The experimental tests indicated fracture load in untreated dog-bone shaped specimen was 2026.1 N which was decreased to 1951.7 N after surface treatment. Moreover, the performed surface treatment was lead and decrease in tensile strength from 29.37 MPa to 26.25 MPa. Comparison of the results confirmed effects of the surface modification on the fracture toughness of the examined semi-circular bending components. Moreover, a 3D laser microscope was used for visual investigation of the specimens. The documented results are beneficial for next designs and optimization of finishing processes.Keywords
Funding Information
- European Regional Development Fund (EFRE-0200545)
This publication has 40 references indexed in Scilit:
- Additive manufacturing tooling for the automotive industryThe International Journal of Advanced Manufacturing Technology, 2017
- 3D printing of polymer matrix composites: A review and prospectiveComposites Part B: Engineering, 2017
- Ceramic Stereolithography: Additive Manufacturing for Ceramics by PhotopolymerizationAnnual Review of Materials Research, 2016
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modelingComposites Part B: Engineering, 2015
- Highly oriented carbon fiber–polymer composites via additive manufacturingComposites Science and Technology, 2014
- Study on the effect of dispersion phase morphology on porous structure of poly (lactic acid)/poly (ethylene terephthalate glycol-modified) blending foamsPolymer, 2013
- ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend SpecimenRock Mechanics and Rock Engineering, 2013
- Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical propertiesPolymer Degradation and Stability, 2010
- A multi-material virtual prototyping systemComputer-Aided Design, 2005
- Short fiber reinforced composites for fused deposition modelingMaterials Science and Engineering: A, 2001