Effect of the type of carbon nanotubes on tribological properties of polyamide 6
Authors:
- 23 March 2009
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 49 (5) , 896-902
Abstract
Multiwalled carbon nanotubes have been synthesized by catalytic chemical vapor deposition of ethylene, using two different catalysts in order to obtain nanotubes with average diameters of 24 and 58 nm, and different lengths. Polyamide 6 (PA6) was reinforced by melt‐mixing in an extruder with 2 wt% functionalized and unfunctionalized carbon nanotubes (CNTs). The nanocomposites were characterized by thermogravimetric analysis, differential scanning calorimetry, and sliding wear determination (SWD). SWD results show a reduction of the residual depth in a scratch test. The reduction is larger in the presence of unfunctionalized CNTs. A further reduction is obtained when decreasing the nanotubes diameter, an effect which is related to larger interfaces between the nanotube and polymeric matrix. CNTs enhance the crystallinity of the polymer and act as nucleation sites, thus increasing the crystallization temperature in respect to neat PA6. The addition of carbon nanotubes helps the formation of PA6 in α‐crystalline form, which is thermodynamically more stable that the γ‐form. CNTs also can act as heterogeneous nucleation sites, hampering the movement of the polymer chains and increasing the crystallization temperature. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics EngineersKeywords
This publication has 25 references indexed in Scilit:
- Reinforcement of Polyamide 6 with NanoparticlesMacromolecular Symposia, 2007
- Crystallization and thermal properties of polyamide 6 composites filled with different nanofillersMaterials Letters, 2007
- Friction and multiple scratch behavior of polymer+monomer liquid crystal systemsPolymer, 2005
- Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrenePolymer, 2004
- Carbon nanotubes: properties and applicationMaterials Science and Engineering: R: Reports, 2004
- Crystallization behavior of nylon 6 nanocompositesPolymer, 2003
- Effects of fluoropolymer addition to an epoxy on scratch depth and recoveryMaterials Research Innovations, 2002
- Composites of poly(vinyl acetate) filled with calcium carbonate: Microscopy, diffractometry and thermophysical propertiesPolymer Engineering & Science, 1999
- Rheology and morphology of poly(vinyl acetate) + calcite filmsPolymer Engineering & Science, 1996
- Surface plasticisation of nylon 6,6 by waterPolymer International, 1995