Eco-friendly concrete with waste ceramic tile as coarse aggregate: mechanical strength, durability, and microstructural properties
Open Access
- 23 May 2023
- journal article
- research article
- Published by Springer Nature in Asian Journal of Civil Engineering
- Vol. 24 (8) , 3363-3373
Abstract
The drive towards circular economy in achieving sustainable concrete cannot be overemphasized. The recycling of waste tiles from the ceramic industry, demolished buildings, or during the construction process could be one way of solving the waste generated from ceramic tiles. This study investigates the use of waste ceramic tiles as coarse aggregates in concrete at replacement levels of 0, 10, 20, 30, 50, and 100% by weight of natural coarse aggregate. Concrete cylinders were cast and tested for compressive and splitting tensile strength after a curing period of 7, 14, and 28 days. Further, the durability of the concrete was investigated via water absorption and total permeable pore volumes in all the concrete mixes. The results indicate that the strength of concrete decreases as the percentage of waste ceramic tile aggregate increases. However, adding 10% tile aggregate in concrete seems acceptable as the strength reduction was relatively low. The water absorption and voids increase as waste ceramic tile aggregate increases. Analysis of variance (ANOVA) test was performed to investigate the statistical significance of the waste ceramic tile aggregate on the properties tested. Artificial neural network (ANN) was also performed to predict the compressive strength of ceramic tile concrete. Based on the outcomes, it is recommended to use 10–20% of waste tile aggregate in concrete production where design compressive strength is less than 20 MPa, which can also reduce the demand for new aggregate, reduce the cost of the project, save the dumping issue, and protect the environment.Keywords
Funding Information
- Stellenbosch University
This publication has 28 references indexed in Scilit:
- A novel approach in modelling of concrete made with recycled aggregatesMeasurement, 2018
- Influence of fibers partially coated with rubber from tire recycling as aggregate on the acoustical properties of rubberized concreteConstruction and Building Materials, 2016
- Mechanical properties of concrete utilising waste ceramic as coarse aggregateConstruction and Building Materials, 2016
- Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretesCement and Concrete Composites, 2012
- Properties of self-compacting concrete prepared with coarse recycled concrete aggregateConstruction and Building Materials, 2010
- Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networksUltrasonics, 2009
- Recycling and reuse of waste concrete in ChinaResources, Conservation and Recycling, 2008
- Effects on concrete durability of using recycled ceramic aggregatesMaterials and Structures, 2006
- Concrete with ceramic waste aggregateCement and Concrete Composites, 2005
- Comparative Study of Backpropagation and Improved Counterpropagation Neural Nets in Structural Analysis and OptimizationInternational Journal of Space Structures, 1998