Posttreatment of powder aerosol deposited oxide ceramic films by high power LED
Open Access
- 5 December 2021
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 19 (3) , 1540-1553
Abstract
The powder aerosol deposition (PAD) method is becoming increasingly important as an energetically advantageous coating method compared to classic ceramic technologies. However, due to the process‐related lattice deformation, ceramic coatings often exhibit reduced functional properties in the as‐deposited state. A thermal posttreatment at temperatures well below the sintering temperature can significantly reduce the lattice deformation and the stress within the film to restore the functional film properties close to sintered bulk samples. In this work, the optothermal posttreatment of PAD films using three different high‐power light emitting diodes (HP‐LED) with different wavelengths within the visible light spectrum is investigated as an alternative to time‐consuming furnace or energy‐intensive laser processes on the example of thermoelectric CuFe0.98Sn0.02O2 films. We demonstrate that the space‐saving LED‐based posttreatment not only restores the film properties but also significantly reduces the required processing time to a few seconds.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (MO‐1060/37‐1, KO 3973/2‐1)
This publication has 35 references indexed in Scilit:
- Room-temperature fast deposition and characterization of nanocrystalline Bi0.4Sb1.6Te3thick films by aerosol depositionJournal of Physics: Conference Series, 2012
- Fiber laser annealing of nanocrystalline PZT thick film prepared by aerosol depositionApplied Surface Science, 2009
- Electronic Structure and Optical Properties of AFeO2 (A = Ag, Cu) within GGA CalculationsChemistry of Materials, 2007
- Thermoelectric Properties of Delafossite-Type Oxide CuFe1-xNixO2 (0 .LEQ. x .LEQ. 0.05)JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2007
- Electro-Optic Properties of Pb(Zr1-xTix)O3 (X=0, 0.3, 0.6) Films Prepared by Aerosol DepositionJapanese Journal of Applied Physics, 2005
- Damage‐Free and Short Annealing of Pb(Zr,Ti)O 3 Thick Films Directly Deposited on Stainless Steel Sheet by Aerosol Deposition with CO 2 Laser RadiationJournal of the American Ceramic Society, 2005
- Magnetic properties and microwave characteristics of Ni–Zn–Cu ferrite film fabricated by aerosol deposition methodJournal of Magnetism and Magnetic Materials, 2005
- Electro-Optical Properties and Structures of (Pb, La)(Zr, Ti)O3 and PbTiO3 Films Prepared Using Aerosol Deposition MethodJapanese Journal of Applied Physics, 2004
- Deposition of Ultra Fine Particles Using a Gas JetJapanese Journal of Applied Physics, 1984
- Optical properties and electronic structure of amorphous Ge and SiMaterials Research Bulletin, 1968