Calculation of the prompt neutron decay constant for the KUCA facility driven by a stationary or pulsed external neutron source
- 23 August 2019
- journal article
- research article
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 57 (2) , 145-156
Abstract
In this study, the I-4 configuration of the KUCA facility, as one of the subcritical experimental benchmarks, was examined using computer simulations and experiments. This configuration has all control rods withdrawn. Two different external neutron sources have been analyzed: a pulsed neutron source generated from protons interactions with target materials and a californium neutron source. The two neutron sources have similar spatial effects because the californium neutron source has been located at the position of the proton beam target. Different methods have been applied to calculate the prompt neutron decay constant (alpha) including: the count rate as a function of time fitting, the Rossi, the Feynman, the Cross-Power Spectral Density (CPSD), the Auto-Power Spectral Density (APSD), and the Maρta methods. The input data for these methods consist of the detector timestamps, which can be obtained experimentally using neutron detectors operating in pulse mode or by MCNP fixed-source simulations. The CPSD, the APSD, the count rate fitting, and Maρta methods do not require the detector timestamps since these methods use the average number of neutron counts over some time bins. These averages can be obtained experimentally using detectors operating in the current mode or by MCNP fixed-source simulations.Keywords
Funding Information
- U.S. Department of Energy (mmm3)
This publication has 12 references indexed in Scilit:
- Simulation and Analysis of List Mode Measurements on SILENE ReactorJournal of Computational and Theoretical Transport, 2018
- Advances in the computation of the Sjöstrand, Rossi, and Feynman distributionsProgress in Nuclear Energy, 2017
- Analysis of KUCA measurements by the reactivity monitoring MAρTA methodAnnals of Nuclear Energy, 2017
- Neutron Detector Signal Processing to Calculate the Effective Neutron Multiplication Factor of Subcritical Assemblies2016
- Neutron Characteristics of Solid Targets in Accelerator-Driven System with 100-MeV Protons at Kyoto University Critical AssemblyNuclear Technology, 2015
- Perspectives of research and development of accelerator-driven system in Kyoto University Research Reactor InstituteProgress in Nuclear Energy, 2015
- Power spectral analysis for a thermal subcritical reactor system driven by a pulsed 14 MeV neutron sourceJournal of Nuclear Science and Technology, 2013
- Applicability of non-analog Monte Carlo technique to reactor noise simulationAnnals of Nuclear Energy, 2011
- Static and Kinetic Experiments on Accelerator-Driven System with 14MeV Neutrons in Kyoto University Critical AssemblyJournal of Nuclear Science and Technology, 2008
- Calculation of the pulsed Feynman- and Rossi-alpha formulae with delayed neutronsAnnals of Nuclear Energy, 2005