Evaluation of a Prosthetic Swing-Phase Controller With Electrical Power Generation
Authors:
- Jan AndrysekJAJan Andrysek
- Bryan SteinnagelBSBryan Steinnagel
- 2 June 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Neural Systems and Rehabilitation Engineering
- Vol. 17 (4) , 390-396
Abstract
With the increased presence of microprocessor-based prostheses in the market place, the availability of a self-energizing system has practical applicability. At present, most commercially available systems require the user to routinely recharge on-board batteries, which reduces the utility of these prostheses. To address this limitation, we have proposed a unique system based on an electromechanical generator to not only continually recharge batteries that are on-board the prostheses, but to also serve as a real time swing-phase damper. A prototype system was developed and evaluated with three active individuals with above-knee amputations across four damping conditions and two gait speeds. Gait and power generation performance were assessed via selected temporal, kinematic and kinetic parameters. Gait parameters including cadence and knee angle symmetry were found to be acceptable when knee damping was adapted for each participant. Across the three subjects and two walking speeds, between 0.57 and 1.57 W of electrical power was produced. These results indicate that this technology may be utilized for prosthetic swing-phase control and ultimately may alleviate the need for manually charging of microprocessor-based prostheses.Keywords
This publication has 13 references indexed in Scilit:
- Energy Expenditure and Activity of Transfemoral Amputees Using Mechanical and Microprocessor-Controlled Prosthetic KneesArchives of Physical Medicine and Rehabilitation, 2008
- Biomechanical Energy Harvesting: Generating Electricity During Walking with Minimal User EffortScience, 2008
- An Electromechanical Swing-Phase-Controlled Prosthetic Knee Joint for Conversion of Physiological Energy to Electrical Energy: Feasibility StudyIEEE Transactions on Biomedical Engineering, 2007
- Rubber bands reduce the cost of carrying loadsNature, 2006
- Design and quantitative evaluation of a stance-phase controlled prosthetic knee joint for childrenIEEE Transactions on Neural Systems and Rehabilitation Engineering, 2005
- Harvesting Energy by Improving the Economy of Human WalkingScience, 2005
- Generating Electricity While Walking with LoadsScience, 2005
- A Clinical Comparison of Variable-Damping and Mechanically Passive Prosthetic Knee DevicesAmerican Journal of Physical Medicine & Rehabilitation, 2005
- Use and satisfaction with prosthetic limb devices and related services 11No commercial party having a direct financial interest in the results of the research supporting this article has or will confer a benefit on the author(s) or on any organization with which the author(s) is/are associated.Archives of Physical Medicine and Rehabilitation, 2004
- Parasitic power harvesting in shoes2002