Experimental and Simulation Study on the Ignition Criterion of JHL‐3 under Non‐Shock Loading
- 19 February 2021
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 46 (4) , 537-547
Abstract
The non‐shock ignition of explosives can bring huge accidental disasters, so it is meaningful to study the conditions under which explosives ignite. The safety performance of JHL‐3, a polymer‐bonded explosive (PBX), under low amplitude and long pulse load has been analyzed based on experiment and simulation from a macro perspective, and the load criterion for ignition of JHL‐3 is given. First, JHL‐3 was loaded under confining pressure by the modified separated Hopkinson pressure bar. By observing whether the explosives ignite at different pulses whose width and amplitude can be changed by changing the length and initial speed of the striker, we find that the greater the loading pressure, the shorter the loading time required for the ignition of JHL‐3. According to the experimental results, the relationship between the amplitude and width of the loading pulse at which the JHL‐3 is ignited is fitted. Then, load JHL‐3 of different densities under the same conditions to analyze the influence of density on the ignition sensitivity of JHL‐3. The experimental results show that the sensitivity is highest when the density is between 1.7–1.75 g/cm3. Finally, based on the Uintah Computational Framework (UCF), the experiment is simulated by the coupling algorithm (MPMICE) of material point method (MPM) and implicit continuous‐fluid Eulerian (ICE). JHL‐3 is modeled by the Visco‐Scram model, and the WSB model is used as a reaction model to simulate the combustion behavior of the explosive after ignition. The simulation results closely match the experimental results, further verifying the accuracy of the ignition criterion. The ignition criterion can predict the ignition of explosives under non‐shock loading conditions, which has a guiding effect on the storage, transportation, and packaging of explosives.Keywords
This publication has 21 references indexed in Scilit:
- A microscopic model for predicting hot-spot ignition of granular energetic crystals in response to drop-weight impactsMechanics of Materials, 2011
- The Mechanical Threshold Stress model for various tempers of AISI 4340 steelInternational Journal of Solids and Structures, 2007
- Advanced equation of state method for modeling TEG–water for glycol gas dehydrationFluid Phase Equilibria, 2005
- High-speed photographic study of the drop-weight impact response of ultrafine and conventional PETN and RDXCombustion and Flame, 2002
- An implicit finite element material model for energetic particulate composite materialsInternational Journal for Numerical Methods in Engineering, 2000
- A constitutive model for the non-shock ignition and mechanical response of high explosivesJournal of the Mechanics and Physics of Solids, 1998
- Role of gas- and condensed-phase kinetics in burning rate control of energetic solidsCombustion Theory and Modelling, 1998
- Steady Deflagration of HMX With Simple Kinetics: A Gas Phase Chain Reaction ModelCombustion and Flame, 1998
- Experimental verification of scaling and test of the universality hypothesis from specific-heat dataPhysical Review B, 1974
- Numerical calculation of almost incompressible flowJournal of Computational Physics, 1968