Ultra-Rapid Crystallization of L-Alanine Using Monomode Microwaves, Indium Tin Oxide and Metal-Assisted and Microwave-Accelerated Evaporative Crystallization
Open Access
- 27 May 2017
- journal article
- Published by Tsinghua University Press in Nano Biomedicine and Engineering
- Vol. 9 (2) , 112-123
Abstract
The use of indium tin oxide (ITO) and focused monomode microwave heating for the ultra-rapid crystallization of L-alanine (a model amino acid) is reported. Commercially available ITO dots (< 5 mm) attached to blank poly(methyl)methacrylate (PMMA, 5 cm in diameter with 21-well silicon isolators: referred to as the iCrystal plates) were found to withstand prolonged microwave heating during crystallization experiments. Crystallization of L-alanine was performed at room temperature (a control experiment), with the use of two microwave sources: a 2.45 GHz conventional microwave (900 W, power level 1, a control experiment) and 8 GHz (20 W) solid state, monomode microwave source with an applicator tip that focuses the microwave field to a 5-mm cavity. Initial appearance of L-alanine crystals and on iCrystal plates with ITO dots took 47 ± 2.9 min, 12 ± 7.6 min and 1.5 ± 0.5 min at room temperature, using a conventional microwave and focused monomode microwave heating, respectively. Complete evaporation of the solvent using the focused microwaves was achieved in 3.2 ± 0.5 min, which is ~52-fold and ~172-fold faster than that observed at room temperature and using conventional microwave heating, respectively. The size and number of L-alanine crystals was dependent on the type of the 21-well iCrystal plates and the microwave heating method: 33 crystals of 585 ± 137 μm in size at room temperature > 37 crystals of 542 ± 100 μm in size with conventional microwave heating > 331 crystals of 311 ± 190 μm in size with focused monomode microwave. FTIR, optical microscopy and powder X-ray diffraction analysis showed that the chemical composition and crystallinity of the L-alanine crystals did not change when exposed to microwave heating and ITO surfaces. In addition, theoretical simulations for the binding of L-alanine molecules to ITO and other metals showed the predicted nature of hydrogen bonds formed between L-alanine and these surfaces.Keywords
This publication has 11 references indexed in Scilit:
- Comprehensive Screen of Metal Oxide Nanoparticles for DNA Adsorption, Fluorescence Quenching, and Anion DiscriminationACS Applied Materials & Interfaces, 2015
- On the origin of surface imposed anisotropic growth of salicylic and acetylsalicylic acids crystals during droplet evaporationJournal of Molecular Modeling, 2015
- DNA Adsorption by Indium Tin Oxide NanoparticlesLangmuir, 2014
- Heat induced evaporative antisolvent nanoprecipitation (HIEAN) of itraconazoleInternational Journal of Pharmaceutics, 2014
- Is it time to revise the normal range of serum uric acid levels?2014
- Crystallization of Amino Acids on a 21-Well Circular PMMA Platform Using Metal- Assisted and Microwave-Accelerated Evaporative CrystallizationNano Biomedicine and Engineering, 2013
- Rapid crystallization of glycine using metal-assisted and microwave-accelerated evaporative crystallization: the effect of engineered surfaces and sample volumeNano Biomedicine and Engineering, 2012
- Discrete Salt Crystallization at the Surface of a Porous MediumPhysical Review Letters, 2012
- Microwave-Accelerated Surface Plasmon-Coupled Directional Luminescence: Application to fast and sensitive assays in buffer, human serum and whole bloodJournal of Immunological Methods, 2007
- Liquid Carbon, Carbon-Glass Beads, and the Crystallization of Carbon NanotubesScience, 2005