Variation of Grain Height Characteristics of Electroplated cBN Grinding-Wheel Active Surfaces Associated with Their Wear
Open Access
Abstract
During the operation of a single-layer grinding wheel (SLGW), irreversible changes occur on its active surface due to wear. The study of grinding-wheel microgeometry changes can be based on the measurement of the surface texture as well as the determination and analysis of its parameters. The article deals with the selection of suitable texture parameters and an appropriate mathematical model carrying information about the SLGW condition. In the study, samples of Pyrowear 53 steel were ground using electroplated cBN single-layer grinding wheels until they were completely worn out or removed assumed volume of the workpiece material. Each SLGW worked with constant process parameters. Among the 144 parameters tested, the highest sensitivity to changes in wheel active surfaces caused by wear was shown by the mean value of the mean island heights Zmean_m. In-depth research was conducted for Zmean_m and reduced peak height Spk. Compared to Spk, Zmean_m has proven to be a better measure of wear, especially when large areas of sticking occur. Moreover, the second-degree models linking Zmean_m and Spk to the process parameters and the specific material loss were better suited to the empirical data than the exponential models.Keywords
This publication has 42 references indexed in Scilit:
- Continuous generating grinding—Tooth root machining and use of CBN-toolsCIRP Annals, 2012
- The Deformation Analysis on Tooth Profiles with Electroplated CBN Hard Gear-Honing-ToolsAdvanced Materials Research, 2012
- Non-destructive measurements of large case depths in hardened steels using the thermal-wave radarNDT & E International, 2012
- Correlation of grinding wheel topography and grinding performance: A study from a viewpoint of three-dimensional surface characterisationJournal of Materials Processing Technology, 2008
- Empirical modelling of grinding force based on multivariate analysisJournal of Materials Processing Technology, 2008
- Performance enhancement of single-layer miniature cBN wheels using CFUBMS-deposited TiN coatingInternational Journal of Machine Tools and Manufacture, 2007
- Thermal Aspects of Grinding With Electroplated CBN WheelsJournal of Manufacturing Science and Engineering, 2004
- Design and application of CBN shape grinding wheel for gearsInternational Journal of Machine Tools and Manufacture, 2003
- The characterisation of grinding wheels using 3D surface measurement techniquesJournal of Materials Processing Technology, 2002
- The application of three-dimensional surface measurement techniques to characterizing grinding wheel topographyInternational Journal of Machine Tools and Manufacture, 1996