Low-Flow-Coefficient Centrifugal Compressor Design for Supercritical CO2
- 31 January 2014
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 136 (8) , 081008
Abstract
This paper presents a design strategy for very low flow coefficient multistage compressors operating with supercritical CO2 for carbon capture and sequestration (CCS) and enhanced oil recovery (EOR). At flow coefficients less than 0.01, the stage efficiency is much reduced due to dissipation in the gas-path and more prominent leakage and windage losses. Instead of using a vaneless diffuser as is standard design practice in such applications, the current design employs a vaned diffuser to decrease the meridional velocity and to widen the gas path. The aim is to achieve a step change in performance. The impeller exit width is increased in a systematic parameter study to explore the limitations of this design strategy and to define the upper limit in efficiency gain. The design strategy is applied to a full-scale reinjection compressor currently in service. Three-dimensional, steady, supercritical CO2 computational fluid dynamics (CFD) simulations of the full stage with leakage flows are carried out with the National Institute of Standards and Technology (NIST) real gas model. The design study suggests that a nondimensional impeller exit width parameter b2* = (b2/R)ϕ of six yields a 3.5 point increase in adiabatic efficiency relative to that of a conventional compressor design with vaneless diffuser. Furthermore, it is shown that in such stages the vaned diffuser limits the overall stability and that the onset of rotating stall is likely caused by vortex shedding near the diffuser leading edge. The inverse of the nondimensional impeller exit width parameter b2* can be interpreted as the Rossby number. The investigation shows that, for very low flow coefficient designs, the Coriolis accelerations dominate the relative flow accelerations, which leads to inverted swirl angle distributions at impeller exit. Combined with the two-orders-of-magnitude higher Reynolds number for supercritical CO2, the leading edge vortex shedding occurs at lower flow coefficients than in air suggesting an improved stall margin.Keywords
This publication has 8 references indexed in Scilit:
- An Investigation of Stall Inception in Centrifugal Compressor Vaned Diffuser1Journal of Turbomachinery, 2012
- A New Streamline Curvature Throughflow Method for Radial TurbomachineryJournal of Turbomachinery, 2010
- Disk friction losses of closed turbomachine impellersForschung im Ingenieurwesen, 2003
- Radial compressor design for industrial compressorsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1999
- A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple-Point Temperature to 1100 K at Pressures up to 800 MPaJournal of Physical and Chemical Reference Data, 1996
- The 1993 IGTI Scholar Lecture: Loss Mechanisms in TurbomachinesJournal of Turbomachinery, 1993
- A Computational Geometry for the Blades and Internal Flow Channels of Centrifugal CompressorsJournal of Engineering for Power, 1983
- Asymmetric Flow in Vaneless Diffusers of Centrifugal BlowersJournal of Fluids Engineering, 1977