Heat sealability of laminated films with LLDPE and LDPE as the sealant materials in bar sealing application
- 27 March 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (6) , 3736-3745
Abstract
The heat sealability of laminated films with linear low density polyethylene (LLDPE) and low density polyethylene (LDPE) as the sealant materials was investigated. A laboratory heat sealer was used to study the response of laminated films to temperature, time, and pressure. Platen temperature was confirmed as primary factor in controlling heat‐seal strength. Dwell time must be sufficiently long to bring the interfacial temperature to a desired level. When the desired heat‐seal strength has been achieved, further increase of dwell time did not improved heat‐seal strength. Platen pressure had little effect above the level required to flatten the materials for good contact. Bar sealing process window for each sample were developed. The optimum combination of platen temperature and dwell time for each laminated film can be obtained in the respective process windows. Strength of heat‐seal and its failure modes are closely related. Plateau initiation temperature closely corresponds to the final melting point of sealant materials. Relatively higher platen temperature was required to seal laminated films with lower thermal conductance. Required dwell time corresponds closely to the heat flow rate of bar sealing process. Laminated films made from extrusion lamination process provided lower level of achievable heat seal strength when compared with the laminated films made from dry‐bond lamination process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3736–3745, 2007Keywords
This publication has 5 references indexed in Scilit:
- The effect of heat sealing temperature on the properties of OPP/CPP heat seal. I. Mechanical propertiesJournal of Applied Polymer Science, 2005
- Heat sealing of semicrystalline polymer films. III. Effect of corona discharge treatment of LLDPEJournal of Applied Polymer Science, 1994
- Heat sealing of semicrystalline polymer films. II. Effect of melting distribution on heat‐sealing behavior of polyolefinsJournal of Applied Polymer Science, 1994
- Heatsealability of Flexible Web Materials in Hot-Bar Sealing ApplicationsJournal of Plastic Film & Sheeting, 1989
- Mechanism of corona–induced self‐adhesion of polyethylene filmJournal of Applied Polymer Science, 1975