An RF-Powered FDD Radio for Neural Microimplants
Authors:
- 2 February 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 52 (5) , 1221-1229
Abstract
We present a radio system that could be used in millimeter-scale wireless neural implants. The system is RF-powered and demonstrates Mbps data rates required for neuromodulation and recording applications. The radio transmits at 58 Mb/s and receives at 2.5 Mb/s maximum data rates. The transceiver uses a duplexer to achieve full-duplex communication via frequency-division duplexing at 1.74 and 1.86 GHz for TX and RX, respectively. The average power consumption of the transmitter is 93 μW at 58 Mb/s, while that of the receiver is 7.2 μW at 2.5 Mb/s. The transceiver was fabricated using 40-nm LP CMOS process and occupies 0.8 mm² of die area. Including the off-chip duplexer, the system occupies 2 x 1.6 x 0.6 mm³.Keywords
This publication has 15 references indexed in Scilit:
- An RF-powered 58Mbps-TX 2.5Mbps-RX full-duplex transceiver for neural microimplants2016
- An Energy Harvesting 2$\times$2 60 GHz Transceiver With Scalable Data Rate of 38–2450 Mb/s for Near-Range CommunicationIEEE Journal of Solid-State Circuits, 2015
- Planar immersion lens with metasurfacesPhysical Review B, 2015
- A Minimally Invasive 64-Channel Wireless μECoG ImplantIEEE Journal of Solid-State Circuits, 2014
- A millimeter-scale wireless imaging system with continuous motion detection and energy harvesting2014
- Wireless power transfer to deep-tissue microimplantsProceedings of the National Academy of Sciences, 2014
- A cubic-millimeter energy-autonomous wireless intraocular pressure monitor2011
- A 350 $\mu$W CMOS MSK Transmitter and 400 $\mu$W OOK Super-Regenerative Receiver for Medical Implant CommunicationsIEEE Journal of Solid-State Circuits, 2009
- Cochlear Implants: System Design, Integration, and EvaluationIEEE Reviews in Biomedical Engineering, 2008
- Modulation, Encoding, and Decoding1991