Preparation of composite polyethersulfone membrane containing basalt powder and optimization of the parameters using response surface methodology
Authors:
- 12 May 2021
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 43 (22) , 1-11
Abstract
In this study, environmental-friendly composite polyethersulfone (PES) membranes based on basalt powder were prepared by phase inversion method. The effects of polymer percentage, the basalt percentage, and the thickness of the membrane were investigated on the distilled water flux, compaction factor, bovine serum albumin (BSA) rejection, contact angle, fouling factor and the parameters were modelled by response surface methodology (RSM). The distilled water flux increased when the basalt was added to the membrane up to 6% percentage of the polymer amount. The blending of basalt also provided resistance against the membrane compaction. The BSA rejection experiments approved the positive effects of basalt on the rejections efficiencies. At higher basalt percentages, the rejection efficiencies increased from 78% at the raw membrane to 99% for the composite membranes had 10% basalt. The adding of basalt to the membranes decreased the contact angles. The hydrophilicity of the membranes contained basalt in their structures was higher than those which had not basalt. By comparison with the neat membranes and the basalt added membrane, it can be said that the basalt increased the flux recovery and decreased the irreversible fouling factors. The basalt increased the antifouling properties for the composite membranes. Finally, the prepared membranes were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). GRAPHICAL ABSTRACTKeywords
This publication has 33 references indexed in Scilit:
- Comparison of ceramic and polymeric membrane permeability and fouling using surface waterSeparation and Purification Technology, 2011
- High performance polyethersulfone microfiltration membranes having high flux and stable hydrophilic propertyJournal of Membrane Science, 2009
- High-Flux Nanofiltration Membranes Prepared by Adsorption of Multilayer Polyelectrolyte Membranes on Polymeric SupportsLangmuir, 2005
- Sensitivity Analysis of Air Gap Membrane DistillationSeparation Science and Technology, 2003
- Characterisation of three hydrophobic porous membranes used in membrane distillation Modelling and evaluation of their water vapour permeabilitiesJournal of Membrane Science, 2002
- Selective Ion Transport across Self-Assembled Alternating Multilayers of Cationic and Anionic PolyelectrolytesLangmuir, 1999
- Membrane formation mechanism based on precipitation kinetics and membrane morphology: flat and hollow fiber polysulfone membranesJournal of Membrane Science, 1999
- Analogue calorimetry of polymer blends: poly(styrene-co-acrylonitrile) and poly(phenyl acrylate) or poly(vinyl benzoate)Polymer, 1996
- Analogue Calorimetric Studies of Blends of Poly(vinyl ester)s and PolyacrylatesMacromolecules, 1996
- Miscibility and phase diagrams of poly(phenyl acrylate) and poly(styrene-co-acrylonitrile) blendsPolymer, 1993