Comparing the Adsorption Performance of Multiwalled Carbon Nanotubes Oxidized by Varying Degrees for Removal of Low Levels of Copper, Nickel and Chromium(VI) from Aqueous Solutions
Open Access
Abstract
Functionalized multiwalled carbon nanotubes (MWCNTs) have drawn wide attention in recent years as novel materials for the removal of heavy metals from the aquatic media. This paper investigates the effect that the functionalization (oxidation) process duration time (3 h or 6 h) has on the ability of MWCNTs to treat water contaminated with low levels of Cu(II), Ni(II) and Cr(VI) (initial concentrations 0.5–5 mg L−1) and elucidates the adsorption mechanisms involved. Adsorbent characterization showed that the molar ratio of C and O in these materials was slightly lower for the oxMWCNT6h, due to the higher degree of oxidation, but the specific surface areas and mesopore volumes of these materials were very similar, suggesting that prolonging the functionalization duration had an insignificant effect on the physical characteristics of oxidized multiwalled carbon nanotubes (oxMWCNTs). Increasing the Ph of the solutions from Ph 2 to Ph 8 had a large positive impact on the removal of Cu(II) and Ni(II) by oxMWCNT, but reduced the adsorption of Cr(VI). However, the ionic strength of the solutions had far less pronounced effects. Coupled with the results of fitting the kinetics data to the Elowich and Weber–Morris models, we conclude that adsorption of Cu(II) and Ni(II) is largely driven by electrostatic interactions and surface complexation at the interface of the adsorbate/adsorbent system, whereas the slower adsorption of Cr(VI) on the oxMWCNTs investigated is controlled by an additional chemisorption step where Cr(VI) is reduced to Cr(III). Both oxMWCNT3h and oxMWCNT6h have high adsorption affinities for the heavy metals investigated, with adsorption capacities (expressed by the Freundlich coefficient KF) ranging from 1.24 to 13.2 (mg g−1)/(mg l−1)n, highlighting the great potential such adsorbents have in the removal of heavy metals from aqueous solutions.Keywords
Funding Information
- Ministarstvo Prosvete, Nauke i Tehnološkog Razvoja (TR37004, III43005)
This publication has 45 references indexed in Scilit:
- Usage of nanoparticles as adsorbents for waste water treatment: An emerging trendSustainable Materials and Technologies, 2019
- Adsorptive nanocomposite membranes for heavy metal remediation: Recent progresses and challengesChemosphere, 2019
- A review on heavy metal pollution, toxicity and remedial measures: Current trends and future perspectivesJournal of Molecular Liquids, 2019
- Assessment of heavy metal pollution from anthropogenic activities and remediation strategies: A reviewJournal of Environmental Management, 2019
- Review on heavy metal adsorption processes by carbon nanotubesJournal of Cleaner Production, 2019
- Removal of heavy metals from water sources in the developing world using low-cost materials: A reviewChemosphere, 2019
- Mechanisms and reutilization of modified biochar used for removal of heavy metals from wastewater: A reviewScience of The Total Environment, 2019
- Clay based nanocomposites for removal of heavy metals from water: A reviewJournal of Environmental Management, 2019
- A review of functionalized carbon nanotubes and graphene for heavy metal adsorption from water: Preparation, application, and mechanismChemosphere, 2018
- Estimating soil organic carbon in Europe based on data collected through an European networkEcological Indicators, 2013