Experimental Investigation on Temperature Field of a Double-Row Tapered Roller Bearing
Authors:
- 6 August 2019
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 62 (6) , 1086-1098
Abstract
Based on the structural features of a double-row tapered roller bearing (DTRB), a test rig for multipoint temperature measurement was built to investigate the temperature filed characteristics of DTRB under different operating conditions. Firstly, the composition of the test rig and the measuring instruments are described and the loading method is introduced. Secondly, a multipoint temperature measurement method for inner and outer rings of DTRBs is introduced, including the arrangement of the sensors and the signal transmission. Finally, the influence of rotational speed and external load on the circumferential, axial, and radial temperature rise and temperature distribution in a DTRB is studied. Results show that for the stationary bearing outer ring, the temperature rise in the load zone is significantly higher than that in the non-load zone. Under combined load, there are obvious temperature differences in the axial, circumferential, and radial directions of a DTRB.Keywords
This publication has 28 references indexed in Scilit:
- Comparing of Temperatures of Rolling Bearing under the Oil-Air Lubrication to the Spray LubricationApplied Mechanics and Materials, 2013
- Thermal Modeling of a Railroad Tapered-Roller Bearing Using Finite Element AnalysisJournal of Thermal Science and Engineering Applications, 2012
- Heat generation modeling of ball bearing based on internal load distributionTribology International, 2012
- Combining regression trees and the finite element method to define stress models of highly non-linear mechanical systemsThe Journal of Strain Analysis for Engineering Design, 2009
- Experiments and models for the thermal response of railroad tapered-roller bearingsInternational Journal of Heat and Mass Transfer, 2008
- Analysis of Double-Row Tapered Roller Bearings, Part I - ModelTribology Transactions, 2003
- Thermally-Induced Failures in Railroad Tapered Roller BearingsTribology Transactions, 1999
- In Situ Tribocomponent Temperature Measurement Using a Radio TelemeterTribology Transactions, 1997
- Rolling-Element Bearing Internal TemperaturesTribology Transactions, 1996
- Torque of Tapered Roller BearingsJournal of Tribology, 1991