Preparation and Discharge Performance of Thin‐Film Thermal Battery
- 9 October 2020
- journal article
- research article
- Published by Wiley in Energy Technology
- Vol. 8 (12)
Abstract
In this study, a thin‐film single cell is successfully prepared by screen‐printing process. The single cell with 100 μm film cathode and 200 μm film electrolyte via screen‐printing technique exhibits a specific capacity of 1163.4 As g−1 up to 1.5 V. For comparison, a single cell with 500 μm pellet cathode and 300 μm pellet electrolyte via powder‐pressing process just presents a specific capacity of 361.3 As g−1. The enhancement of specific capacity of single cells prepared by the screen‐printing method can be ascribed to the microstructure of the thin film, which improves the diffusion rate of Li+ by macroscopically reducing the thickness of the single cell, and thus releases the maximum capacity of the active material. The thin‐film single cell also demonstrates low diffusion impedance, making it potentially suitable for use in a pulse miniaturization thermal battery. This work provides guidance for the potential engineering application of screen‐printing techniques in thermal battery preparation.Keywords
This publication has 18 references indexed in Scilit:
- Cu2O as a promising cathode with high specific capacity for thermal batteryJournal of Power Sources, 2020
- Hydrothermally synthesized homogeneous Ni–Mo–S structures on Ni-foam cathodes for thermal batteriesChemical Communications, 2019
- Synthesis and electrochemical performance of WS2 nanosheet for thermal batteriesMaterials Letters, 2019
- Preparation and electrochemical properties of a new Fe0.5Co0.5S2 cathode material for thermal batteriesJournal of Alloys and Compounds, 2018
- The acceleration intermediate phase (NiS and Ni 3 S 2 ) evolution by nanocrystallization in Li/NiS 2 thermal batteries with high specific capacityJournal of Power Sources, 2017
- Thermal batteries with ceramic felt separators – Part 2: Ionic conductivity, electrochemical and mechanical propertiesCeramics International, 2017
- Synthesis and discharge performances of NiCl2 by surface modification of carbon coating as cathode material of thermal batteryApplied Surface Science, 2017
- Electrochemical properties of a lithium-impregnated metal foam anode for thermal batteriesJournal of Power Sources, 2015
- Thermal activated (“thermal”) battery technologyJournal of Power Sources, 2008
- Thermally activated (“thermal”) battery technologyJournal of Power Sources, 2006