Thermal Behavior and Mechanical Properties of Different Lattice Structures Fabricated Using Selective Laser Melting
Open Access
- 16 November 2024
- Vol. 17 (22) , 5603
Abstract
In this study, the size of molten pool and the porosity of parts under different processing parameters are studied using numerical simulation. According to the results, the appropriate processing parameters were selected to simulate the temperature and residual stress distribution during the forming process of body-centered cube (BCC), face-centered cube (FCC) and rhombic dodecahedron (Dode) lattice structures. In addition, three lattice structures were fabricated via selective laser melting (SLM) technology, and quasi-static compression experiments were carried out to study their mechanical properties. The results show that the high temperature parts of the three structures are all under the node and their adjacent pillars, and the closer to the nodes, the higher the temperature. The residual stress of the Dode structure is the highest, reaching 1218.2 MPa. It is also found that the residual stress in the Z direction is the largest, which plays a dominant role in the forming process. Through compression experiments, it is found that diagonal shear failure occurs in all three lattice structures, and Dode shows the best compression performance.Keywords
Funding Information
- Excellent Postgraduate Dissertation Cultivation Foundation of Zhejiang Sci-Tech University (LW-YP2024045, 22242297-Y, LQ18E050010, 2018M642482)
- Fundamental Research Funds of Zhejiang Sci-Tech University (LW-YP2024045, 22242297-Y, LQ18E050010, 2018M642482)
- Zhejiang Provincial Natural Science Foundation of China (LW-YP2024045, 22242297-Y, LQ18E050010, 2018M642482)
- China Postdoctoral Science Foundation funded project (LW-YP2024045, 22242297-Y, LQ18E050010, 2018M642482)
This publication has 28 references indexed in Scilit:
- Study on Thermodynamic Behavior, Microstructure and Mechanical Properties of Thin-Walled Parts by Selective Laser MeltingMetals and Materials International, 2023
- Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4VFinite Elements in Analysis and Design, 2023
- Predictions of Additive Manufacturing Process Parameters and Molten Pool Dimensions with a Physics-Informed Deep Learning ModelEngineering, 2023
- Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusionAdditive Manufacturing, 2022
- Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser meltingInternational Journal of Mechanical Sciences, 2021
- Scanning strategy in selective laser melting (SLM): a reviewThe International Journal of Advanced Manufacturing Technology, 2021
- Bending behavior of lightweight C/SiC pyramidal lattice core sandwich panelsInternational Journal of Mechanical Sciences, 2020
- The influence of additive manufacturing processing parameters on surface roughness and fatigue lifeInternational Journal of Fatigue, 2019
- An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg partsThe International Journal of Advanced Manufacturing Technology, 2018
- Influence of processing parameters on laser penetration depth and melting/re-melting densification during selective laser melting of aluminum alloyApplied Physics A, 2016